Rivets (clutch Facing/brake Linings)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
|A rivet is unthreaded, headed pin used to join two parts by passing the pin through holes in the parts and then forming a second head in the pin on the opposite side. Rivets are widely used for achieving a permanent mechanically fastened joint. Connection between metal parts are required in most applications, and are a critical part of every design. Rivets require that holes be made to receive them, which reduces that net cross section, and these holes must be very accurately aligned. In a riveted connection, joining permanently two plate-like members or rolled shape flanges. The connection may be subjected to tension tending to pull the members aparts or to shear the members either axially or transversely. The connection may also resist moments, perhaps created by eccentric loads. Torsional, twisting or tearing forces may also be applied. It is essential to determine the forces that act on a connection, both under normal loads and in extraordinary circumstances. A rivet comes as a circular steel rod with a forged head, the manufactured head, on one end. For use, it is placed red-hot into a hole conventionally 1/16 greater in diameter. The length of a rivet is the distance from the underside of the head to the end of the fresh rivet. The thickness of the material to be joined is the called the grip of the rivet. The length of the rivet to be used for a certain grip is given in tables. The rivet is then set by forging a field head onto it. Rivets can be used in any orientation; enough clearance must exist to set them properly. A riveted joint is quickly made, and is easy to inspect. For the connection of relatively thin members in steel construction, rivets were traditionally used. Such connections proved very reliable, giving excellent service. The overall fasteners market is estimated at about Rs. 28 bn. while the organized sector has a share of 65%, the balance of 35% is shared by unorganized sector and imports. The imports in 2006-07 were Rs. 8 bn, leaving Rs. 2 bn or 7% as the market for the unorganized sector in value terms. The market is heavily dependent on imports which have been growing at close to 28.5% in recent period. There is good future prospect for this industry. Few Indian Major Players are as under: Agarwal Bolts Ltd. G K W Ltd. Indian Steel & Wire Products Ltd. Precision Gears Ltd.|
|Plant capacity: 108000 MT/Annum||Plant & machinery: 17 Lakhs|
|Working capital: -||T.C.I: Cost of Project : 78 Million|
|Return: 40.00%||Break even: 62.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.
NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.
Products & Services