Plastics, Polymers and Resins, Polypropylene (PP), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS), Polyethylene terephthalate (PET), Polyester, PA, Poly(vinyl chloride) (PVC), Polyurethanes (PU), Polycarbonate (PC), Polyethylene (PE)Projects

Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.

The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.

The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.

Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.

India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years.  Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 11 of 23 | Total 224 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 22 23   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

PLASTIC GRANULES FROM WASTE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Plastic is a very common material that is now widely used by everybody in this world. Plastic is used in many ways as it is light weight and compact. The maintenance that is required is very less. Common plastic items that are used are bags, bottles, containers and food packages. A plastic is any one of a large and varied group of materials, which consists of essential ingredient combination of carbon with oxygen, hydrogen, nitrogen and other organic and inorganic elements. While solid in the finished state, at some stage in its manufacture it has been or can be formed into various shapes by flow-usually through the application singly or together of heat and pressure. They play an important role in the economy of all industrially advanced countries. Though plastic is a very useful material that is flexible, robust and rigid they become waste after their use and they pollute the atmosphere. To protect the environment as well as to take advantage of plastic, recycling procedure is used. Plastic recycling is the process of reprocessing used scrap and waste plastic into new plastic material. Recycling old plastic products uses 20%-40% less energy than manufacturing it from new. To aid the recycling process, plastics come with plastic identification code to identify the different polymers that are used in the manufacture of plastic. The American Society of Plastics has recognized seven different types of plastic and has given each category a number, which can be found on the bottom of the plastic container. The two most recyclable categories are: 1. Marked “1”: This category contains PET or PETE (Polyethylene Terephthalate) plastics. 2. Marked “2”: This category contains HDPE (high-density polyethylene) plastics. Plastics find application in a wide range of products, in industrial and agricultural applications and consumer use. Hence, the demand for plastics depends largely on growth in user segments and overall macro-economic growth. It has been seen that the consumption of polymers is closely linked to the economic development of a country. In this respect, plastics are similar to rubber and driven by the same factors. Thus all used plastics will either go for recycling or land filling. If all plastics could have been recycled, we could reduce our oil consumption and save 25% of our landfill space. Plastics waste recycling is considered to be one of the most viable projects all over the world today. Developed countries like Japan, Korea, reprocess plastic waste in a big way. There are new techniques introduced every day; however, the polymer industry can develop new grades and types of plastics, that too faster than the recycling equipment industry can develop identification & sorting techniques as well as equipment. There is still much that can be done to improve the collection and infrastructure of the recycling industry. Incentives to increase collection and use of recycled or bio based materials come mainly from legislatively mandated initiatives or from positive business climates (such as dramatic increases in oil prices or consumers demand). There is a very good scope and market potential for recycling. New entrepreneurs should venture into this field. Few Indian Major Players are as under: A B M International Ltd. Aadi Industries Ltd. Bhagwati Spherocast Ltd. Borana Plastic Ltd. Electro Polychem Ltd. Gujarat Chemi-Plasto Ltd. Lifeline Injects Ltd. Omrim Securities Ltd. Petro Plast Industries Ltd. Poly Medicure Ltd. Rishi Packers Ltd. Shree Datta Inds. (India) Ltd. Shyam Textiles Ltd. Super Polyfabriks Ltd. Suprapti Plastics Ltd. Tarajyot Polymers Ltd. V H C L Industries Ltd.
Plant capacity: 720000 Kgs./AnnumPlant & machinery: 65 Lakhs
Working capital: -T.C.I: 192 Lakhs
Return: 42.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

BIODEGRADABLE PLASTIC PRODUCTS (BAGS, PLATES & GLASSES) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Plastics have become an important part of modern life and are used in different sectors of applications like packaging, building materials, consumer products and much more. Most of today's plastics and synthetic polymers are produced from petrochemicals. As conventional plastics are persistent in the environment, improperly disposed plastic materials are a significant source of environmental pollution, potentially harming life. The biodegradable polymers could be an alternative to the conventional plastic materials. The term biodegradable means that a substance is able to be broken down into simpler substances by the activities of living organisms, and therefore is unlikely to persist in the environment. There are many different standards used to measure biodegradability, with each country having its own. The requirements range from 90 per cent to 60 per cent decomposition of the product within 60 to 180 days of being placed in a standard composting environment. Biodegradable plastics are mainly derived from corn, wheat and potato starch. Biodegradable plastics products are thermoplastic materials which are processed with the same machines traditionally used to process conventional plastics. Biodegradable plastic products physical and chemical properties are similar to those of traditional plastics, but it is completely biodegradable in different environments, just like pure cellulose. The advantages of biodegradable plastics can prevent plastic pollution from becoming worse, and other methods can be used to help clean up any of this pollution that is already present. Waste to energy programs, and other alternative uses for traditional plastics that are cluttering up landfills and other areas, can eliminate the plastic garbage buildup that harms the earth and environment. India consumes around five million tons (mt) of plastic products every year. Of this, a large amount of consumption happens through use of plastic bags alone. The country doesn’t have a national ban on use of plastic bags. However, on their own, several states such as Punjab, Goa, Himachal Pradesh, Jammu & Kashmir, Kerala, Maharashtra, Sikkim and West Bengal have imposed a ban on plastic bags. Rajasthan, the largest state of India joined this green league in July. In recent years, more and more attention as the green packaging and also for the promotion of environmental protection considerations began to encourage the production of biodegradable plastic packaging. Biodegradable materials by nature rely on the role of microbial decomposition, as packaging materials can significantly reduce the amount of garbage. With good quality of products, about 41% of biodegradable packaging is used for food preservation. 90 years since the 20th century, the global production of biodegradable plastics rapid increase, of which around 60% used in the packaging industry. The coming year 2011, biodegradable plastic packaging production will reach 116,000 tons, an average annual growth rate of 22%. There is a very good scope and future for this product and new entrepreneurs should venture into this field.
Plant capacity: 28125000 Nos./Annum Glass, 15000000 Nos./Annum Plates, 12857000 Nos./Annum BagsPlant & machinery: 145 Lakhs
Working capital: -T.C.I: Cost of Project : 258 Lakhs
Return: 44.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable plastic syringes are a great innovation in the field of medical equipment. Disposable needle is widely used by doctors for injection purpose with the help of syringes. A disposable plastic syringe is one of the fastest ways to administer life saving drugs and vaccinations to a patient. The major advantage of using disposable syringes is that no infection is transmitted since the injection is disposed off immediately after use. With the increase in population in our country, requirement of medicine and injections have increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector. Few Indian Major Players are as under: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd. Transmedica (India) Ltd.
Plant capacity: 1500000 Nos./Annum (5 ML), 1500000 Nos./Annum (10 ML)Plant & machinery: 44 Lakhs
Working capital: -T.C.I: Cost of Project : 102 Lakhs
Return: 41.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

HDPE BAGS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Packaging is both a symbol of societys consumption habits and reflection of its progress. The user expects it to have better strength, easier handling, to be lighter, more aesthetic, safer from a hygiene point of view, etc. The manufacturer undertakes research and development to meet these demands and to offer a high quality product. In addition to its standard attributes, todays packaging just also contributes to protecting the environment, and certainly must not damage it besides being friendly to human health. The HDPE/PP woven sacks are basically used for packing of cement and fertilizers companies, but presently also used for skimmed milk powder, sugar, grains and number of other products after value addition by making usable them for other products. HDPE/PP woven sacks are 100% recyclable, does not break easily, reusable and having more tensile strength. The product will be directly sold to the end users as per their requirement. HDPE/PP Woven Sacks can be unlaminated, Laminated and along with PE liners. Woven Sacks are the best and the most cost effective packaging solution for Industries like Cement, fertilizer, sugar, Chemicals, food grains etc. Off late Woven fabric, which is the first stage of Woven sacks, is a preferred medium for bale wrapping and rain protection in the form of Tarpaulin. Woven sacks enjoy a good market in India and will continue to do so in the coming years. Plastic woven sacks are rapidly replacing jute bags because they have often various advantages over the conventional jute fabrics as packaging materials. They have excellent chemical resistance; they are light in weight and more suitable for packing of various chemicals in the form of granules and powder. They are also: Stronger and can withstand much higher impact loads. Their elongation at break is 15 to 25 per cent compared to 3 per cent for jute; they are much cleaner, both in use and production and can be used to handle food products as they are resistant to fungal attack. Because of such superior properties of plastic woven sacks, it has high demand everywhere. The packaging industry is estimated at Rs 150 bn and is growing at 14-15% annually. This growth, according to industry watchers, is expected to double in the next two years. It is estimated that more than 80% of packaging in India constitutes rigid packaging, the rest being flexible. There is a very good scope and market potential for this product and new entrepreneurs should venture into this field. Few Indian Major Players are as under: Bharat Fertiliser Inds. Ltd. Brij Fabrics Pvt. Ltd. Deccan Polypacks Ltd. Jai Corp Ltd. Jajodia Industries Ltd. Kamakhya (India) Ltd. Oripol Industries Ltd. P E T Fibres Ltd. Packtech Industries Ltd. Pithampur Poly Products Ltd. Polyspin Ltd. R D B Rasayan Ltd. Raj Packwell Ltd. S P L Industries (Shanti Packaging) Ltd. Shankar Packagings Ltd. Texplast Industries Ltd. Timespac India Ltd. Tulsyan N E C Ltd. U I C Udyog Ltd. Union Quality Plastics Ltd.
Plant capacity: 60000000 Nos./AnnumPlant & machinery: 1337 Lakhs
Working capital: -T.C.I: Cost of Project : 1824 Lakhs
Return: 43.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

POLYVINYLIDENE FLUORIDE (PVDF) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Polyvinylidene fluoride is a specialty plastic material in the fluoropolymer family. It is used generally in applications requiring the highest purity, strength, and resistance to solvents, acids, bases and heat and low smoke generation during a fire event. Polyvinylidene fluoride is made up of 59% fluorine, 38% carbon and 3% hydrogen. The compatibility of the carbon and fluorine is such that it offers resistance to UV degradation and atmospheric chemical attach, which is far superior to the acrylic topcoat. PVDF is the material of choice when the porous structure will be exposed to ozone or chlorine. A fine powder grade is also used as the principal ingredient of high-end paints for metals. PVDF is known particularly for its creep resistance over a broad range of temperatures. It is widely used for gasketing and the lining of pipes and tanks. Its highly desirable solubility and electrical properties result from the polarity of alternating CH2 and CF2 groups on the polmer chain. PVDF tubing is ideal for fluid applications which require a high degree of purity such as the transfer of ultra-pure deionized water. Thinner walled PVDF tubing is translucent making it easier to confirm fluid movement. Thin wall PVDF tubing is also more flexible than FEP and PFA tubing but does not have as broad a working temperature range. If one needs a polymer that will withstand exposure to harsh thermal, chemical or ultraviolent conditions, PVDF offers superior stability similar to the performance of fluoropolymers in these environments. PVDF, an extremely hard material, may be used at temperatures from -80°F to 300°F (–62°C to 149°C). No oxidation of thermal degradation occurs during continuous exposure to 300°F (149°C). PVDF is a fluorocarbon and is classified as “Self Extinguishing, Group 1 by Underwriters Laboratories, Inc. Thus it is used as good anti-corrosion material in chemical industry, especially in the circumstances of acid, organic solvents, halogens, as well as their mixture. Widely used as insulation material in electronic / electric industries, computer industry, air/space industry to make cable sheathing, coating layer, and condenser film, etc. PVDF may be synthesized from the gaseous VDF monomer via a free radical (or controlled radical) polymerization process. This may be followed by processes such as melt casting, or processing from a solution (e.g. solution casting, spin coating, and film casting).At present, Vinylidene fluoride/Polyvinylidene Fluoride resin is not produced in India. A number of Indian organisations who need to use PVDF in pumps, membranes, electronic parts either import the PVDF product itself or import PVDF sheet/powder for the production of PVDF product. PVDF sheets and rolls are imported in various thickness and sizes depending upon the requirement of individual organizations. The use of PVDF membrane is very selective in India and is imported. Indian demand for PVDF is much less than potential. There is a considerable efforts put forward to increase the demand for PVDF in India by setting up application laboratories and carrying out strong technical services oriented market campaign.
Plant capacity: --Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

POLY TETRA FLUORO ETHYLENE (PTFE) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene. It is known by the trade name as Teflon. Polytetrafluoroethylene, or PTFE, is made of a carbon backbone chain, and each carbon has two fluorine atoms attached to it. Polytetrafluoroethylene (PTFE) shows a remarkable chemical resistance and it is insoluble in all known solvents. It is attacked only by molten alkali metals and by fluorine at high temperatures. PTFE is incombustible and may be used up to 260°C (300°C for short periods). PTFE's coefficient of friction is extremely low and it shows the effect of self lubrication with constant mechanical properties which makes it particularly suitable for bearings, joints, O-rings, stirring bars, hazardous materials bottle pourers, syringes, crucibles, evaporating dishes etc. PTFE may be shaped by compression and sintering into bottles and beakers where its chemical stability and non-wettability make it suitable for use in extreme circumstances. It has an excellent resistance (no attack) to dilute and concentrated acids, alcohols, aldehydes, bases, esters, aliphatic, aromatic and halogenated hydrocarbons, ketones, mineral oils, vegetable oils and oxidizing agents. PTFE is used as a non-stick coating for pans and other cookware. It is very non-reactive, partly because of the strength of carbon–fluorine bonds, and so it is often used in containers and pipe work for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear, and energy consumption of machinery. PTFE is also used to treat carpets and fabrics to make them stain resistant. It can be used for making artificial body parts which is useful in medical applications. PTFE has varied uses in moulding and lining, in manufacture of bearings, compression rings, compressors, unsintered tapes and autoclave valves, seals and joints. PTFE is made from the monomer tetrafluoroethylene by free radical vinyl polymerization. The Indian demand for PTFE is around 3000 tonnes per annum and the Indian production is around 2250 tonnes per annum. The growth rate in demand through 2015 will be around 9 to 10% per annum. The global production for last year was 140,000 tonnes per annum and there is a good demand of this product all over the world due to its varied application. According to the present situation, new capacity creation can be thought of by new entrepreneurs.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

CHLORINATED POLYETHYLENE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Chlorinated polyethylene (CPE) is one kind of high molecule elastic material developed in late years, which is one of the random chloride produced through reaction of polyethylene and chlorine. It is an odorless nontoxic and white or pale yellow powder having a chemical formula (-CH2-CHCl-)n CPE has good aging resistance and stability, perfect weather ability and can have long service life under bad weather conditions, bending and cracked deformation resistance, chemical resistance and organic Solvent resistance, excellent low-temperature resistance and electrical specifications, and superior high filling property, the physical property cannot be changed after adding A lot of filling agent into CPE. CPE is mainly used as impact modifier for PVC or compounded with LDPE or HDPE film to improve toughness. Its films are used as pond liners and for agricultural applications. It is also used for rubber processing industry. It can be solely or cross-blended with other materials to Produce plastic profile shapes, waterproof winding materials, anti-flaming conveyer belts, wire and Cable covers, color bike tires and magnetic adhesive strips of refrigerator. It is a kind of Perfect modifier for hard plastic product and plasticizer of Soft plastic product. CPE products are made by chlorinating polyethylene (PE) to form chlorinated polyethylene (CPE). The production processes of CPE include the aqueous suspension method, the acid phase suspension method, the solid phase method and the solution method. The demand for CPE is driven due to replacement of wood and steel with plastics in manufacturing doors/windows. With the development of PVC plastic profiles for doors and windows, the demand for CPE has grown rapidly. However, the demand growth is likely to be affected to some extent due to the possible replacement of better impact modifiers such as ACR and MBS resins. The global total CPE capacity and output are about 530 000 tonnes per annum and 265 000 tonnes per annum, respectively. CPE is the most widely used impact modifier in the PVC profiles industry. About 80% of CPE is used for PVC modification and about 20% for the production of wires, cables and ABS modification. World consumption of CPE is forecast to grow at an average annual rate of about 4%. CPE is presently not produced in India.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

PVC WATER STORAGE TANKS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Proper storage of water is essential for various uses like bathing, cleaning, drinking, cooking etc. Water tanks are used to ensure safe and clean water for various purposes. So it becomes necessary to construct the tank in a way that maintains the purity and hygiene of water. Plastic water storage tanks are lighter and more portable; they are great space savers and cost less than their steel or wood counterparts. These tanks are an attractive alternative to steel tanks. They do not corrode, they come in a variety of colors, and the majority has a very good warranty. However, these tanks are manufactured from petrochemicals derived from oil and are difficult to recycle or dispose of in a safe and ecological manner. Being constructed from such materials, a plastic is also highly vulnerable to damage from fire. Plastic tanks have only been in production for about 20 years, and as the effects of exposure to intense prolonged sunlight are known to break down the UV stabilizer, a plastic tank will inevitably fade in color and may collapse or split. Tanks should have a fully self-supporting roof. Some tank manufacturers have a pole or frame in their larger tanks to hold up the roof. These poles sometimes push through the top of the tank or even the bottom and allow mice and rats to get into the tank. Polyvinylchloride (PVC) has a linear structure similar to polyethylene but with a chlorine atom replacing a hydrogen atom on alternate carbon atoms. PVC itself is hard and rigid but the addition of phthalate esters as plasticizers makes it soft and pliable. Thus hygiene is an essential component of healthy living, integral to achieving health and preventing disease and Plastic water tanks provides an excellent way to store water. This product has a very long life and good scope in the market. New entrepreneurs should venture into this field.
Plant capacity: 50000 Nos./Annum,PVC Storage Tanks,Storage Tank Cap. 1000 Ltrs.Plant & machinery: 350 Lakhs
Working capital: -T.C.I: 1389 Lakhs
Return: 48.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self destructing or auto disable (AD) syringe as a safe bet against re use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector. Few Indian Major Players are as under: Company Name Albert David Ltd. Disposable Medi Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd. Transmedica (India) Ltd. Cost Estimation: Capacity : 22500000 Nos./Annum (5ml Size) 22500000 Nos./Annum (10 ml Size)
Plant capacity: -Plant & machinery: 636 Lakhs
Working capital: -T.C.I: Cost of Project : 837 Lakhs
Return: 46.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

PLASTIC (HDPE) WATER STORAGE TANKS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

The term Plastics usually refers to a large and varied group of synthetic materials which are solid in finished form but at some stage in their processing are fluid enough to be shaped by application of heat and pressure. The use of plastics in building has grown rapidly in the last few years. Plastics were first used for decorative and non structural purposes but because of increased knowledge of the long term properties of plastics particularly resistance to creep and environmental effects some plastics are now available that maintain long term structural integrity, such as piping, doors and windows, water tanks that can contain moderate pressures for a long period of time. During the last decade Plastic (conversion) Industry has progressed at a fast rate. New fields of application of plastics are continually being developed. It is easier to cope with this diversity if plastics are considered to be a category of materials like metals embracing different distinct families in which each family, in turn is composed of many individual types. Inspite of the diversity of plastics being great, in practice the choice for a given application will normally lie between a narrow band of plastic spectrum. Within this band there may be several plastics which approximate the desired requirements. Selection of the best one out of these requires weighing and comparing the properties of each. Among thermoplastic, L.D.P.E., L.L.D.P.E., H.D.P.E, P.V.C., Polyethylenes, Polypropylenes etc have entered market with large number of articles of multifarious uses. Water Storage tanks are an attractive alternative to steel tanks. They do not corrode, they come in a variety of colors, and the majority has a very good warranty. However, these tanks are manufactured from petrochemicals derived from oil and are difficult to recycle or dispose of in a safe and ecological manner. Being constructed from such materials, a plastic is also highly vulnerable to damage from fire. Plastic tanks have only been in production for about 20 years, and as the effects of exposure to intense prolonged sunlight are known to break down the UV stabilizer, a plastic tank will inevitably fade in color and may collapse or split. Big sizes tanks of plastics are manufactured by various methods patronized under molding. Large size water tanks sintex type are being made of plastic material by a unique process known as Rotational molding for making hollow parts especially applicable for making large or complex shapes usually from polyethelene. Plastic tanks are becoming very popular and are finding wider acceptability in every homes as well as industry. HDPE water storage tanks are most reliable water tanks available today. These tanks are suitable for water storage purpose in residential to commercial properties. They have a significant life expectancy of 20 to 22 years (even used outdoor under hot tropical climate), in addition, they are non toxic/food grade, rust & rot free, extremely durable & long lasting, sunlight (UV) & chemical resistant, seamless & odourless. As regards plastic tanks in particular there are only very few manufacturers in India who manufacture H.D.P.E. sintax type tanks. Since these tanks are light in weight, non-corrosive in nature, high bursting strength and low initial cost it is replacing steel tanks, aluminium and wooden tanks. Consumption of plastic tanks is growing usually in housing, oil industries, chemical industries producing acids alkalies etc and in gas producing industries where it is filled up under high pressure. As water supply tanks for domestic use it has found place in every modern home, flat, and building. Every houses built today has water storage tanks. Plastic tanks are the favored choice. The consumption of water tanks (plastic) is linked with housing development. Thus there exists ever increasing demands for plastic water tanks commensurate with development of Housing both in Rural and Urban areas and in industries. There is a very good scope and market potential for this product and new entrepreneurs should venture into field. Few Indian Major Players are as under: Balmer Lawrie Van Leer Ltd. Fusion Polymers Ltd. Hitech Plast Ltd. Mipak Polymers Ltd. Naman Plastic Processor Ltd. Prestige Hm Polycontainers Ltd. Rasik Plast Ltd. Raunaq Plastics Ltd. Sintex Industries Ltd. T P L Plastech Ltd. Time Technoplast Ltd. United Impex Ltd. Cost Estimation: Capacity : 90000 Nos./Annum Plastic (HDPE) Storage Tanks Storage Tank Cap. 1000 Ltrs.
Plant capacity: -Plant & machinery: 167 Lakhs
Working capital: -T.C.I: 1245 Lakhs
Return: 49.00%Break even: 28.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 11 of 23 | Total 224 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 22 23   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects