Best Business Opportunities in West Bengal- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mineral: Project Opportunities in West Bengal

PROFILE:

A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. India is one of the world's most naturally endowed lands. India is home to numerous minerals which benefit the country economically. The minerals produced in India constitute one-quarter of the world's most popular mineral resources.

RESOURCES:

West Bengal stands third in the country in terms of mineral production. The state contributes about one-fifth to the total production of minerals in the country. Coal constitutes 99% of the minerals extracted in West Bengal; fireclay, china clay, limestone, copper, iron, wolfram, manganese and dolomite are mined in small quantities. There are good possibilities of obtaining mineral oil and natural gas in the areas near the Bay of Bengal.

West Bengal is the third largest state for coal production, accounting for about half of India's total. Lignite mined in Darjeeling is used to make briquettes. West Bengal ranks next to Bihar and Madhya Pradesh in production of fireclay. China clay used in the pottery, paper, textile, rubber and paint industries are unearthed at Mohammad Bazar in Birbhum and Mejia in Bankura. Limestone which is used in cement industry is mined in Bankura, Purulia, Darjeeling and Jalpaiguri. There are copper mines in Jalpaiguri and Darjeeling. Small quantities of low quality iron-ore are mined in Bardhaman, Purulia, Birbhum and Darjeeling. There are manganese in the Jhargram region of Paschim Medinipur, Purulia and Bardhaman. The state’s production of dolomite comes from the Dooars region of Jalpaiguri.

GOVERNMENT POLICIES:

Keeping pace with the liberalised Mineral Policy being adopted by the Government of India, Government of West Bengal has formulated its Mineral Policy in 2002. Among the basic objectives of the West Bengal Mineral Policy, 2002 following are worth mentioning:

1. To review the existing State monopolies over mineral exploration and wherever required, go in for selective de-reservation.

2. To invite private capital, resources and technology, both foreign and domestic, for better exploration and exploitation;

3. To promote necessary linkages for smooth and uninterrupted development of mineral based industries to meet the needs of the State.

4. To ensure proper vigilance and supervision of mining activities with particular emphasis on simplification of procedures and greater generation of revenues from mineral resources.

5. To develop industry friendly facilities in specific minerals like, Coal, Granite and China Clay and in Natural gas like Coal bed Methane.

 

Iron and Steel: Project Opportunities in West Bengal

PROFILE:

India has one of the richest reserves of all the raw materials required for the industry, namely land, capital, cheap labour, iron ore, power, coal etc. Yet India is 5th in the world ranking for production of steel. Iron and steel is basis for laying the vibrant Indian industry. Production of steel has come to exist as an index of a country's potential, industrial and economic growth. The making of iron and steel had been known to the people of India since long. The iron pillar of Delhi is a proof of it and speaks of the quality of steel produced in this country in ancient times. The steel industry is often considered to be an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development. The per capita usage of steel gives an indication of the technological advancement of a nation.

RESOURCES:

The growth of steel industry in the State is largely related to the proximity of raw materials, skilled manpower, port facilities and the vast market for steel products. Given these location advantages, large numbers of mini integrated steel plants have already been set up in the state manufacturing a wide range of products such as sponge irons, mild steels, iron pipes etc. The neighbouring Eastern States of India viz. Jharkhand, Orissa and Chattisgarh are endowed with huge iron ore reserves along with cooking coal and non-cooking coal. The establishment of Bengal Iron Works at Kulti in Burdwan district of West Bengal in 1870 where the first commercial blast furnace was set up in 1875 heralded the commencement of this industry in the State.

The easy availability of power, competitive rates of freight, close proximity to areas with natural resources relevant to the industry, and labour force traditionality skilled in operating iron and steel units are factors that have influenced the surge in investment in this sector.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Leather: Project Opportunities in West Bengal

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The Indian leather sector meets 10% of global finished leather requirement. The leather industry is spread in different segments, namely, tanning & finishing, footwear & footwear components, leather garments, leather goods including saddlery & harness, etc.

RESOURCES:

West Bengal has been functioning as a vast raw material resource base for the leather industry in the form of hides and skins. However, Indian leather export has undergone a transition from the export of raw hides and skins in the fifties to value added finished leather in the nineties. In the context, leather processing industries in West Bengal needed a strong structural support and proposal was mooted for setting up an eco-friendly complex near Calcutta with modern technical and training facilities. In this full scale integrated leather complex, facilities for leather-finishing, computer-aided design centres, modern training centre for up gradation are also being provided. This mega complex will also have manufacturing units to produce footwear uppers, finished foot wears, leather goods and garments to catering to the expanding domestic and export markets. The availability of a wide range of cost effective leather chemicals with consistent quality is crucial for the success of such a mega complex. Entrepreneurs can set up manufacturing units in the mega complex for both tanning chemicals and post-tanning chemical auxiliaries.

 

GOVERNMENT POLICIES:

Government policies in support of the industry are:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semifinished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme 

 

Petrochemicals: Project Opportunities in West Bengal

PROFILE:

The petrochemical industry in India has been one of the fastest growing industries in the country. Since the beginning, the Indian petrochemical industry has shown an enviable growth rate. This industry also contributes largely to the economy of the country and the growth and development of manufacturing industry as well. It provides the foundation for manufacturing industries like construction, packaging, pharmaceuticals, agriculture, textiles etc.    

RESOURCES:

The state of West Bengal accounts for almost 4% of India’s production of petroleum products and 13% of India’s polymer production. The production has almost doubled in the last decade. Crude throughput at Haldia refinery increased to 5,502 million tones and its capacity utilization increased to 91.7% during 2005-06.

The growth of the Petrochemical sector has been very impressive both in terms of units set up and investment volume. The main reason for the recent growth of this industry is due to upstream and downstream industry linkages by the oil refining and petrochemical units set up in the state. The industry is due to receive a further fillip with the announcement of US$ 1 billion gas pipeline project to bring natural gas in the state. Haldia Petrochemicals Ltd. is India’s second largest integrated petrochemical complex. Currently producing 1.5 million tons of polymers and chemicals and has grown significantly to its present turnover of US$ 1.4 billion.

GOVERNMENT POLICIES:

The major thrust areas of the policy are:

•        Encourage public sector companies & nationalized banks to enter the capital market to raise resources & offer new investment avenues.

•        Invite & encourage private sector investment in these industries in order to accelerate growth.

•        Set up Petroleum, Chemical & Petroleum Investment Regions (PCPIR) in the state to promote investment on a global scale.

•        Foreign Technology investments will be invited in the petrochemical industries.

•        Encourage Foreign Equity participation in the petrochemical industries.

 

Food Processing: Project Opportunities in West Bengal

PROFILE:

Indian food processing industry is widely recognized as a 'sunrise industry' having huge potential for uplifting agricultural economy, creation of large scale processed food manufacturing and food chain facilities, and the resultant generation of employment and export earnings. The food processing sector in India is geared to meet the international standards. Food Safety and Standards Authority of India has the mandate to develop standards and also to harmonise the same with International Standards consistent with food hygiene and food safety requirement and to the conditions of India's food industry.

RESOURCES:

West Bengal is one of the three front running states in India in food and agro processing sector. Fruits, vegetables and cereals grow in abundance in West Bengal. The state accounts for 30% of potatoes, 27% of pineapples, 12% of bananas and 16% of India’s rice production. Additionally fruits like mangoes, papaya, guava and jackfruit and vegetables like tomatoes, cauliflowers, cabbage, brinjal, pumpkin, are available in plenty.

West Bengal is the largest producer of rice, pineapple, vegetables and fruits in the country and second largest producer of potatoes and lychees. It ranks 1st in total meat production (including poultry) in the country and accounts for 10% of the country’s edible oil production. It is a substantial producer of spices, coconut, cashew nut, arecanut, betel vine and oilseeds. West Bengal is also one of the leading states in pisciculture since it the largest producer of fish.

GOVERNMENT POLICIES:

Agro & Food Processing Industries form a very important part of the State’s economy. The West Bengal Government is setting up a number of policies & plans to focus on the selected areas like vegetables, fruits, fisheries, rice, poultry, dairy & floriculture. The major thrust areas of the policy are:

•        Increase agricultural production & productivity vertically through wider adoption of appropriate eco-system-specific & cost effective technology.

•        Bring more area under High Yielding Variety (HYV), hybrid & improved varieties of crops.

•        Emphasize increase production of pulses & oil seeds in non-traditional areas & non-conventional seasons.

•        Create employment opportunities in this sector to improve the socio-economic status of the farmers & also to remove sub-regional disparity.

•        Extending soil-testing facilities up to district level for proper use of fertilizer.

•        Post-harvest technology for reducing loss & better marketability.

•        Bring cultivable waste land & fallow land under cultivation.

•        Application of low cost technology for increasing production & productivity.

•        More money involvement in agriculture.

•        Encourage private entrepreneurship for processing of fruits, vegetables & horticultural items.

•        Promote floriculture parks & flower complexes in the state.

•        Other Business Process, knowledge Process and Engineering Process Outsourcing services

The State Government is encouraging the farmers for mechanization through the use of modern agricultural implements & machines for timely farm operation & reduction in the cost of cultivation.

 

Textiles: Project Opportunities in West Bengal

PROFILES:

The Indian textile industry is one of the largest industries in the world. The textile industry in India is the largest provider of employment after agriculture. This industry is one of the earliest industries of India to come into being; it is presently the second biggest industry in the world after China. Over the years, this industry has proved to be the provider of the basic requirements of the people. The industry holds a vital place in the Indian economy as it makes a contribution of 14 % to the industrial production of the country and at the same time sums up 4% of the total GDP of India. Along with contributing to the Indian economic scenario in terms of employment, involvement in the industrial production, foreign revenues the textile industry of India also contributes to the global textile economy. It contributes to the global textile fibre and yarn production.

RESOURCES:

The textile industry of Kolkata plays a significant role in the economy of the capital city of the state of West Bengal. West Bengal has traditionally been a major producer of cotton textile as well in the country. Jute textile manufacturing is the most prominent industry in West Bengal due to availability of raw jute in the state. At present there are 59 Jute mills in West Bengal. Main jute products are Hessian, sacking, jute bags, and other items produced by jute. Most of the jute mills are located on the banks of river Hooghly near Kolkata. West Bengal is the leader and pioneer in the country for the manufacturing of Jute textiles. Hosiery industry in West Bengal has a huge grow potential as Bengal was the birthplace of hosiery industry in India.

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995 Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Biotechnology: Project Opportunities in West Bengal

PROFILE

The Indian biotechnology sector is one of the fastest growing knowledge-based sectors in India and is expected to play a key role in shaping India's rapidly developing economy. With numerous comparative advantages in terms of research and development (R&D) facilities, knowledge, skills, and cost effectiveness, the biotechnology industry in India has immense potential to emerge as a global key player. Biopharma and bioservices sectors contributed 63 per cent and 33 per cent, respectively, to the total biotech exports. The bioagriculture, bioindustrials and bioinformatics sectors remained focussed on domestic operations, bringing in nearly 90 per cent of their revenues from India.

RESOURCES

West Bengal has a vast knowledge base with few of the premiers institutes of India located here.          Presence of Kharagpur IIT which over the years have done path breaking research in this sector is a major resource of biotechnology development. It has rich bio diversity, characterized by several species of medicinal & aromatic plants and diverse agro climatic zones. A matrix of 75 deliverable products is ready for commercialization in the agro and medical sector. Increase awareness among people about the adverse side effects of synthetic drags.

GOVERNMENT POLICIES:

The state has been putting efforts to facilitate the growth of biotech industries and development of clean biotech technologies. The various key initiatives under this section include:

•        Conserve bio-diversity through mapping and sustainable use of bio-resources.

•        Create a "Centre of Excellence for Biotechnology" as a high quality support service to Biotech Industries.

•        Facilitate the flow of venture capital funds and bank credit to Biotech companies.

•        Spread general awareness for optimum utilisation of Biotechnology in the agriculture sector.

 

Automobile and auto components: Project Opportunities in West Bengal

PROFILE:

The Indian auto industry has the potential to emerge as one of the largest in the world. Presently, India is second largest two wheeler markets in the world, fourth largest commercial vehicle market in the world. 11th largest passenger car in the world and is expected to be the seventh largest market by 2016. The growth is a reflection of the emergence of India as a global automobile hub with almost all global auto makers having set up plants in India to cater mainly to the domestic market, as also the export market. The Indian auto component industry has kept pace with technological developments and is today catering not only to OEM and Tier I auto makers in India but abroad as well. Many Indian auto part makers have today also succeeded in emerging as the supplier of choice to global auto majors.

RESOURCES:

West Bengal has traditionally been very strong in the engineering industries and has been an important manufacturing base in the past. West Bengal’s Hindustan Motors was one of the pioneers by commencing production of vehicles in the state in the year 1948. Recently it has collaborated with Mitsubishi Company of Japan to diverse into a wide range of cars and manufactures everything related to automobile industry like trekkers, trucks, and also luxury cars like Mitsubishi Lancer and touching a consolidated net sale of US$ 233.47 million in the last fiscal year. West Bengal realizing this huge potential in this sector has geared up with appropriate plans and policies to boost this sector. Also it has got certain inherent competitive advantages since the state is located in the heart of India’s steel and manufacturing cluster.

 

GOVERNMENT POLICIES:

A number of policy initiatives have been taken by the government to facilitate the automotive industry. These include:

•        Permitting 100% FDI in this sector & removal of minimum capital investment norm for fresh entrants.

•        Establishing an international hub for manufacturing small, affordable passenger cars & a centre for manufacturing two-wheelers.

•        Conducting incessant modernization of the industry & facilitate indigenous design, research & development.

•        Leveraging State’s software technology into automotive technology wherever relevant.

•        Encouraging development of vehicles propelled by alternate energy sources.

•        Development of domestic safety & environmental standards at par with the international standards.

•        Emphasis on low emission fuel auto technologies & availability of appropriate auto fuels.

The State is also encouraging dynamic investment in the sector to create an environment for volume production & indigenous capability for small cars & auto parts.

 

Tea: Project Opportunities in West Bengal

PROFILE:

Tea is indigenous to India and is an area where the country can take a lot of pride. This is mainly because of its pre-eminence as a foreign exchange earner and its contributions to the country's GNP. In all aspects of tea production, consumption and export, India has emerged to be the world leader, mainly because it accounts for 31% of global production. It is perhaps the only industry where India has retained its leadership over the last 150 years. Tea production in India has a very interesting history to it. The range of tea offered by India - from the original Orthodox to CTC and Green Tea, from the aroma and flavour of Darjeeling Tea to the strong Assam and Nilgiri Tea- remains unparalleled in the world.

RESOURCES:

West Bengal is the second largest tea growing state in the countryl contributing almost 21% of the total production in the country. There are three tea-growing zones in the state;       Darjeeling,          Terai and Dooars. Darjeeling tea is considered to be the finest in the world. There are 343 tea gardens in West Bengal covering 1,03,950 hectares planted area. Some of the major players in the Tea industry in West Bengal include Tata Tea Ltd, James Finlay & Company. Both of them together are representing world’s second largest global branded tea operations with product and brand presence in over 50 countries. Goodricke Group Ltd. (GGL) a part of the UK-based Cammelia Plc, the world’s single largest tea producer in the private sector. In India it is the third largest tea producer and the leading producer of Darjeeling tea.

GOVERNMENT POLICIES:

The tea industry in India is highly regulated. It requires licenses for its import or export. While The Tea Act, 1953 controls production and distribution activities, the Tea (Marketing) Control Order, 2003 regulates tea sales and stipulates that a defined percentage of tea produced from each garden be sold through the auction system. In addition to this central cess, States also levy sales tax on sale of tea. Profits from production and sale of tea are subject to agricultural income tax by the states. Thus, the residual income after paying corporate tax is taxed again. This tax is levied on profits accruing to gardens located in respective state. 100% foreign direct investment (FDI) in tea industry is permitted subject to compulsory divestment of 26% equity of the company in favour of an Indian partner / Indian public within five years from the date of investment.

 

Tourism: Project Opportunities in West Bengal

PROFILE:

Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. India's rich history and its cultural and geographical diversity make its international tourism appeal large and diverse. It presents heritage and cultural tourism along with medical, business and sports tourism. India has one of the largest and fastest growing medical tourism sectors.

RESOURCES:

West Bengal has the widest variety of attractions in terms of tourist spots from the bustling Kolkata Megapolis with its historical and modern charms, to the zones of tranquillity like the Himalayan terrain in the north to the Sunderbans in the south. The state is endowed with all the diversities of nature that is a tourist’s dream. From the arid Chhota Nagpur plateau region in the west, forests in the north and south, mountains in the north, sea beaches in the south and rivers crisscrossing the whole of the state the varied panorama offers the discerning traveller a very wide choice and caters to the requirements of varied travel segments. More specifically, the snow capped peaks of the Himalayas, Darjeeling, referred by many as the Queen of the Hill Stations, the Darjeeling Himalayan Railway declared as a World Heritage Site, the vast tea estates of the Dooars, the famed Royal Bengal Tiger of Sunderbans, the innumerable historical landmarks of India’s and Bengal’s glorious history are all wonders for the prospective tourists.

GOVERNMENT POLICIES:

In order to develop tourism in India in a systematic manner, position it as a major engine of economic growth and to harness its direct and multiplier effects for employment and poverty eradication in an environmentally sustainable manner, the National Tourism Policy was formulated in the year 2002. Broadly, the “Policy” attempts to:-

•        Position tourism as a major engine of economic growth;

•        Harness the direct and multiplier effects of tourism for employment generation, economic development and providing impetus to rural tourism;

•        Focus on domestic tourism as a major driver of tourism growth.

•        Position India as a global brand to take advantage of the burgeoning global travel trade and the vast untapped potential of India as a destination;

•        Acknowledges the critical role of private sector with government working as a pro-active facilitator and catalyst;

•        Create and develop integrated tourism circuits based on India’s unique civilization, heritage, and culture in partnership with States, private sector and other agencies; and

•        Ensure that the tourist to India gets physically invigorated, mentally rejuvenated, culturally enriched, spiritually elevated and “feel India from within”.

 

Waste Management: Project Opportunities in West Bengal

PROFILE:

Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity, and the process is generally undertaken to reduce their effect on health, the environment or aesthetics. Waste management is a distinct practice from resource recovery which focuses on delaying the rate of consumption of natural resources. The management of wastes treats all materials as a single class, whether solid, liquid, gaseous or radioactive substances, and tried to reduce the harmful environmental impacts of each through different methods.

RESOURCES:

There are 609 hazardous waste generating units in West Bengal. Amongst the nineteen districts of the state, two districts (Darjeeling and South Dinajpur) do not generate hazardous waste. The total quantum of hazardous waste generation from West Bengal is 2,59,776.24 metric tonnes per annum. (MTPA), out of which 46 per cent (1,20,596.41 MTPA) is landfillable, 49 per cent (1,26,596.38 MTPA) is recyclable and the remaining 5 per cent (12,583.45 MTPA) is incinerable by nature. Interestingly, it was observed that the majority of hazardous waste generating units in the state is small and is generating meagre quantity of waste, whereas the units generating substantial amount of hazardous wastes are limited in number.

 

GOVERNMENT POLICIES:

The Central Government notified the Municipal Solid Wastes (Management & Handling) Rules 2000 under Sections 3, 6 and 25 of the Environment (Protection) Act 1986 for the purpose of managing municipal and urban wastes/garbage in an environmentally sound manner. Government of West Bengal are the nodal agencies for technical guidance and preparation of project report for the development of municipal solid waste management plan for the municipal authorities situated within Kolkata Metropolitan Area (KMA) and Non-KMA areas respectively. National policy on waste management is set out in the October 1998 policy statement on waste management- Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 11 of 44 | Total 434 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 43 44   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Pickles (Various Types) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Pickle is a general term used for fruits or vegetables preserved in vinegar or brine, usually with spices or sugar or both. Pickle producing businesses are engaged in producing pickle in different varieties. Natural fruit and vegetable items are used as raw material for producing various types of pickles i.e. mango, beet, cabbage, cauliflower etc. Pickles are considered the permanent part of the food table all over the Sub-Continent and its demand is rising after its production on commercial scale. Sub-continental spices, preserved foods and traditional methods of cooking and food making have always been attractive to the world. Pickling is one of the oldest methods of food preservation. Indian pickles play an important role in fruit and vegetable preservation industry. Pickles are a very familiar term known to every locality especially in India. These are being used in India & other countries as food adjuncts and known to impart flavor & taste to the food. They increase the appetite by stimulating gastric secretion and to a certain extent supplement the food with additional minerals and vitamins. Green/slightly under ripe fruits and vegetables are most suitable for making pickles. The food value of cucumber pickles exceeds that of eggs, rice, fresh onions and fresh tomatoes. Uses Mainly, these top products are used as eatables & food. Particularly all these products of sauces pickles, squashes, Morabbas etc. are used in dining table. It has very good taste to have such drinks during unfilling. It is used for being appetizing. These are used in different hotels and restaurants, in the academic institutions and messes. In the military canteens and the officers mess people used to have them in larger quantities. Main key factor in Pickle production include purchase of raw material at a time when it is available in economical price. Therefore, seasons when vegetables and fruits i.e. mango, carrot, Garlic and Cucumber etc. are easily available at low price would be critical. In India, the pickles are being manufactured by a number of units. The manufacturing process is simple and the top product is having great demand. Any entrepreneur venture into this field will be successful. Cost Estimation Capacity : • Mango Pickle : 851.0 Kgs./Day • Cabbage Pickle : 1,075.0 Kgs./Day • Onion Pickle : 1,163.0 Kgs./Day • Apple Pickle : 990.0 Kgs./Day • Walnut Pickle : 1,825.0 Kgs./Day • Turnip Pickle: 887.0 Kgs. /Day • Jack Fruit Pickle: 688.0 Kgs./Day • Cauliflower Pickle: 608.0 Kgs./Day • Lime Pickle (Sour): 604.0 Kgs./Day • Lime Pickle (Sweet): 729.0 Kgs./Day • Chilli Pickle: 747.0 Kgs./ Day • Mushroom Pickle: 1,130.0 Kgs./Day
Plant capacity: -Plant & machinery: Rs 65 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 527 Lakhs
Return: 31.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Bitumen Emulsion - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Bitumen is defined as “A viscous liquid, or a solid, consisting essentially of hydrocarbons and their derivatives, which is soluble in trichloro-ethyelene and is substantially nonvolatile and softens gradually when heated. It is black or brown in colour & posseses waterproofing and adhesive properties. It is obtained by refinery processes from petroleum, and is also found as a natural deposit or as a component of naturally occurring asphalt, in which it is associated with mineral matte. Bitumen emulsion is one kind of speciality chemicals, which has large commercial uses as coating materials in the road construction and many other construction fields. It is also used as sealing material for the different type of laminated paper. Bitumen is available in the nature also and it is the byproduct of petroleum distillation plant or coal carbonization plant. Uses Most bituminous binders are used in the construction of roads. These are viscous semisolids at normal temperature. Therefore these require to be brought to a fluid state by heating, by dilution with solvent or by emulsifying before being applied in thin film. Use of emulsions facilities not only flows at atmospheric temperature but also application to damp road surfaces and wet aggregates. Bitumen emulsions are dispersions of very fine bitumen particles in an aqueous medium. They are easy to handle and find a wide application in road construction and maintenance; soil stabilization; grouting; tack coating; surface dressing;crack filling; seal coating; premixing; dust laying and in various other special circumstances where cold application of bitumen is desirable. The bitumen market was valued at USD 71.44 billion in 2013 and is likely to reach USD 93.38 billion by 2020, expanding at a CAGR of 3.9% during the forecast period from 2014 to 2020. In terms of volume, the global demand for bitumen stood at 108,348.9 kilo tons in 2013. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Art Infra Solutions Pvt. Ltd. • B G H Exim Pvt. Ltd. • Bitchem Asphalt Technologies Ltd. • Hemi Petro Products Ltd. • Hindustan Colas Ltd. • Indian Oil Corpn. Ltd. • Kochi Refineries Ltd. • Modern Road Makers Pvt. Ltd. • Ojas Technochem Products Ltd. • Stanpacks (India) Ltd. • Tinna Rubber & Infrastructure Ltd.
Plant capacity: 50 MT/DayPlant & machinery: Rs 143 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 372 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Condoms - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Control of fertility continues to be an important issue through the world even though the population growth rate has shown a steady decline in many countries, partly owing to the extensive use of condoms (male) or with use of oral contraceptives (female). Rubber condoms (male) are used by the majority of man today for enjoying the sexual intercourse. The function of the condoms it’s to collect the sperm created by the man during sexual intercourse. This condom prevents the sperm in penetrating into the female reproductory organ. The condoms or contraceptives (male) are usually made from natural rubber (latex). The rubber is used because of the unique physical properties which are Elasticity; Flexibility; Impermeable. The use of condoms or contraceptives results in steady decline in population of growth. In rural areas where peoples are illiterate & uneducated about sexual education did not utilized condoms or contraceptive. So the Government of India made a special programme to educate them about sexual education. The Government also made a special family planning programme for the rural areas. They generally advice the population or people of the rural areas to use condoms or other related things to check the greatly increasing population. In rural & urban areas the government sold condoms or contraceptive free of cost from and government dispensary & hospital. At present the country's total demand of condom is being fulfilled by total three manufacturing units. Hindustan Latex Ltd. of Kerala is Central public sector undertaking was set up in 1969 to manufacture Condoms. It is the largest manufacturer of Condoms in the country today and produces thinnest variety of Condoms in the world. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Cupid Ltd. • Famy Care Ltd. • H L L Lifecare Ltd. • J K Ansell Ltd. • London Rubber India Ltd. • Medtech Products Ltd. • Pashupati Seohung Ltd. • T T K Biomed Ltd. • T T K Healthcare Ltd. • T T K Protective Devices Ltd.
Plant capacity: 116,666.7 Pcs /DayPlant & machinery: Rs 139 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 400 Lakhs
Return: 25.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Sweet & Scented Supari in Pouches - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

The betel nut (Supari) tree, which is known as "ARECA" in South India. It is planted in Bengal, Mysore, Sri Lanka etc. Its yield considered being very good in Sri Lanka. The betel (Piper betle) is the leaf of a vine belonging to the Piperaceae family, which includes pepper and kava. It is valued both as a mild stimulant and for its medicinal properties. Betel leaf is mostly consumed in Asia and elsewhere in the world by some Asian emigrants, as betel quid or in paan, with or without tobacco with adverse health effects. Betel is notable for staining the teeth of regular users. It is found in various places and its yield is different due to changed climate. Betel nut chewing has been practiced by natives in various countries since times. So keeping in mind its demand manufacturer utilising supari as a raw material for making various chewing material as Supari, Pan chapp gutaka, Pan Masala, Mayur brand sweet supari, scented supari etc. People chew it for stress reduction, feelings of well-being, and heightened awareness. It contains three major alkaloids: arecoline, pilocarpine, and muscarine. ? USES 1. It is used to refresh the mouth. 2. It freshens up mouth and breathes with its flavour. 3. It is chewed by all age group people. 4. It is served to guests after lunch and dinner to keep mouth fresh. 5. It helps in digestion of food after meals 6. It is served in marriages, parties or any other special occasions. 7. It is a direct substitute of pan, pan masala etc. 8. Widely used in religious and social functions. Cost Estimation Capacity • Sweet & Scented Supari (2 gms Size Pouches) : 83,333.3 Pouches /Day • Sweet & Scented Supari (5 gms Size Pouches): 33,333.3 Pouches / Day • Sweet & Scented Supari (10 gms Size Pouches): 16,666.7 Pouches / Day
Plant capacity: -Plant & machinery: Rs 9 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 192 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Paraffin Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37°C (99°F); its boiling point is >370 °C (698 °F). Common applications for paraffin wax include lubrication, electrical insulation, and candles. It is distinct from kerosene, another petroleum product that is sometimes called paraffin. Paraffin wax from a solvent dewaxing operation is commonly known as slack wax, and the processes used for the production of waxes are aimed at de-oiling the slack wax (petroleum wax concentrate). Wax sweating was originally used to separate wax fractions with various melting points from the wax obtained from shale oils. Wax sweating is still used to some extent but is being replaced by the more convenient crystallization process. Chemically, paraffin wax is a mixture of saturated aliphatic hydrocarbons (with the general formula CnH2n+2).Wax is the residue extracted when lubricant oils are dewaxed and it has a crystalline structure with a carbon number greater than 12.The main characteristics of wax are (1) absence of color, (2) absence of odor, (3) translucence, and (4) a melting point above 45°C (113°F). Uses • Candle-making • Coatings for waxed paper or cloth • Food-grade paraffin wax: • Shiny coating used in candy-making; although edible, it is nondigestible, passing right through the body without being broken down • Coating for many kinds of hard cheese, like Edam cheese • Sealant for jars, cans, and bottles • Chewing gum additive • Anti-caking agent, moisture repellent, and dust binding coatings for fertilizers • Used in Forensic investigations Wax consumption has been projected to grow at an average annual rate of greater than 2 percent from 2010 to 2020. Waxes are used in a variety of products, including packaging, coatings, personal care products and of course, candles. Waxes can also be further processed into synthetic lubricants. Overall wax demands are largest for board sizing and candles . Combined these two products account for about 44 percent of the demand. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Chennai Petroleum Corpn. Ltd. • Mahalaxmi Dyes & Chemicals Ltd.
Plant capacity: Paraffin Wax:10 MT/Day •Micro Crystalline Wax (Bye Product):0.03 MT/Day •Foot Oil (Bye Product):2.51MT/Day Plant & machinery: Rs 270 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 922 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Contact Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

An adhesive is any substance applied to the surfaces of materials that binds them together and resists separation. The term "adhesive" may be used interchangeably with glue, cement, mucilage, or paste. Adjectives may be used in conjunction with the word “adhesive” to describe properties based on the substance's physical or chemical form, the type of materials joined, or conditions under which it is applied. The use of adhesives offers many advantages over binding techniques such as sewing, mechanical fastening, thermal bonding, etc. These include the ability to bind different materials together, to distribute stress more efficiently across the joint, the cost effectiveness of an easily mechanized process, an improvement in aesthetic design, and increased design flexibility. Adhesives may be found naturally or produced synthetically. The earliest human use of adhesive-like substances was approximately 200,000 years ago. There is hardly any product in our surroundings that does not contain at least one adhesive – be it the label on a beverage bottle, protective coatings on automobiles or profiles on window frames. Applicators of different adhesives are designed according to the adhesive being used and the size of the area to which the adhesive will be applied. The adhesive is applied to either one or both of the materials being bonded. The pieces are aligned and pressure is added to aid in adhesion and rid the bond of air bubbles. Polychloroprene contact adhesives are used for bonding high-pressure laminates, automotive trim, roofing-membrane attachment, furniture, kitchen cabinets, custom display cabinets, interior and exterior panels, wall partitions, shoe soles, and many other applications where quick, high-strength, permanent bonds are needed. Thus, as an entrepreneur, contact adhesive production offers an exciting opportunity to you.
Plant capacity: Contact Adhesive: 160 Kgs/DayPlant & machinery: Rs 32 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 220 Lakhs
Return: 10.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Mattress & Quilt - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A mattress is a large pad for supporting the reclining body, used as or on a bed. Mattresses may consist of a quilted or similarly fastened case, usually of heavy cloth, that contains hair, straw, cotton, foam rubber, etc.; a framework of metal springs; or they may be inflatable. Mattresses are usually placed on top of a bed base which may be solid, as in the case of a platform bed, or elastic, e.g. with an upholstered wood and wire box spring or a slatted foundation. Flexible bed bases can prolong the life of the mattress. Popular in Europe, a divan incorporates both mattress and foundation in a single upholstered, footed unit. Divans have at least one innerspring layer as well as cushioning materials. They may be supplied with a secondary mattress and/or a removable "topper." A quilt is a type of blanket, traditionally composed of three layers of fiber: a woven cloth top, a layer of batting or wadding, and a woven back, combined using the technique of quilting. A quilt is distinguishable from other types of blanket because it is pieced together with several pieces of cloth. “Quilting” refers to the technique of joining at least two fabric layers by stitches or ties. In most cases, two fabric layers surround a middle layer of batting (cotton, polyester, silk, wool or combinations of fibers) which is a lighter, insulating layer. Batting is often referred to as “wadding” in Britain. Some modern quilts are made with an upper fabric layer, quilted to a layer of microfleece, perhaps without a fabric backing. The most decorative fabric surface is called the “top”, and is the design focus. A single piece of fabric (a “whole cloth quilt”) may be used as the top, or the top may be “pieced” from smaller fabric pieces. Sewing together smaller pieces of fabric into a larger patchwork "block" of fabric creates the basic unit. Few Indian Major Players are as under • Dunlop Comforts Pvt. Ltd. • Gandhigram Rubbers Ltd. • India Tyre & Rubber Co. (India) Ltd. • Kontak Comforts Pvt. Ltd. • M B I Intercorp Ltd. • M M Rubber Co. Ltd. • Oriental Veneer Products Ltd. • Southern Latex Ltd.
Plant capacity: Mattress 200 Nos/Day, Quilt:1000 Nos/DayPlant & machinery: Rs 63 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 364 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

India is the largest producer of fruits and second largest producer of vegetables in the world. Fruits & vegetables, being perishable in nature require certain techniques of preservation for retaining the freshness intact and making them an acceptable item even after few days of ripening. It also facilitates the farmer to realize a better price instead of selling the product at a throw away price due to the perishability. This necessity as evolved a new concept of storing these items at below or just above sub-zero temperatures known as cold storage. Introduction of Cold storage / Cold room facility will help them in removing the risk of distress sale and simultaneously will ensure better returns. The annual production of fruits and vegetables in the country accounts for 18 to 20% of our agriculture output. Varied agro climatic conditions and better availability of scientific package of practices, there is a vast scope for increasing the production. Cold Storage is a special kind of room, the temperature of which is kept very low with the help of machines and precision instruments. India is having a unique geographical position and a wide range of soil, thus producing variety of fruits and vegetables like apples, grapes, oranges, potatoes, chillies, ginger, etc. Marine products are also being produced in large quantities due to large coastal areas. As per 2008-09 figures, India produces around 215 Million Tons of Fruits and Vegetables, 3 Billion Tons of Marine Products, 109 Million Tons of Milk, 56 Billion Eggs and 38 Million Tons of Meat per annum. Commercially apples, potatoes, oranges, etc are stored on large scale in the cold storages. Other important costly raw materials like dry fruits, chemicals, essences and processed foods like fruit juice/pulp, concentrate dairy products, frozen meat, fish and eggs are also stored in cold storages to regulate marketing channels of these products. Therefore, it is a good project for entrepreneurs to invest. Uses Cold storage is used to preserve fruits and vegetables. Once they are kept in the cold storage, they do not get spoiled even after many months. Sometimes, in production season of certain vegetable or fruit crops, the demand for those thing decreases, which in turn decreases the consumption in surplus amount of that particular item and it is kept in a cold storage. Few Indian Major Players are as under • Allana Cold Storage Ltd. • Anjaneya Cold Storage Ltd. • Asvini Fisheries Pvt. Ltd. • H M G Industries Ltd. • Hindusthan Ice & Cold Storage Co. Ltd. • Ideal Ice & Cold Storage Co. Ltd. • Indagro Foods Ltd. • Jindal Steel & Alloys Ltd. • Karnavati Cold Storage Ltd. • Karnimata Cold Storage Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • Mohan Meakin Ltd. • Nav Bharat Refrigeration & Inds. Ltd. • Prabhu Hira Ice & Cold Storage Ltd. • Ram'S Assorted Cold Storage Ltd. • Sri Vatsa Hotels Ltd. • Universal Cold Storage Pvt. Ltd. • Uptown Trading & Investments Ltd.
Plant capacity: 3000 MTPlant & machinery: Rs 266 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 882 Lakhs
Return: 26.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

PVC Wire & Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from its generating site to where it is utilized. An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations at load centers. Low-voltage cable is used to distribute power from the load centers to utilization equipment in conduits and ducts, even though other methods such as cable trays, direct burial for outdoor applications, and aerial cable are used. Electrical, mechanical, and environmental considerations are the main factors in selecting and applying cable systems for distribution and utilization of electrical power. Cables are the source of carrying power and signal in power plants, refineries, process industries. Cable network can carry fire from one place to another in the event of fire caused due to external sources or due to short circuit. Power cable industry in India is eyeing an estimated Rs 50 bn market to unfold. About 78,000 MW of power generation capacity and 60,000 circuit km of transmission network are projected to be added by 2012 according to the Eleventh Five Year Plan. Capex required for every MW of power generating capacity is about Rs 40 mn. Expenditure required in the Eleventh Five Year Plan for power generation has been estimated at Rs 270 bn. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bindawala Cables & Conductors Ltd. • Gem Cables & Conductors Ltd. • I L A C Ltd. • Industrial Cables (India) Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Sanco Industries Ltd. • Skytone Electricals (India) Ltd. • Torrent Cables Ltd. • Universal Cables Ltd. • Vimal Flexsol Ltd.
Plant capacity: Single Core Wires (THHN/THWN) 60 KM/Day,Single Core Stranded (CU/PVC)45 KM/Day,Multiple-Core Flexible-Wire (Sheathed)21 KM/DayPlant & machinery: Rs 55 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 189 Lakhs
Return: 31.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Medical College with Hospital - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A medical college is meant to impart education of medical field to students to qualify them as doctors in different specialized disciplines so as to treat patients suffering from various ailments. Doctors with their dedicated spirit serve the nation at large by providing medication and treatment for eradication of diseases, which exchange health and add suffering to humanity. Normally a medical college is associated with a hospital. Hospitals provide the facilities of O.P.D. and admission for seriously ill seriously injured, seriously burnt and pregnant ladies, causalities etc. Presently, every city or town in India has no. of private hospitals furnished with latest medical facilities available and with more qualified surgeons, physicians and specialist doctors. Even sometimes, they are furnished with more modern machines than those available in the nearby Government Hospital. These hospitals can be seen well crowded as they provide very good service at a smile. As they are run by privates very good medical care is provided by them. A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital, surgeons, physicians, E.N.T., specialists, children specialist, Eye-surgeon, psychologists and sex-specialist are essential.
Plant capacity: Total Students per Annum:150 Students Admitted/Annum 700 Beded HospitalPlant & machinery: Rs 2047 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 31862 Lakhs
Return: 1.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 11 of 44 | Total 434 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 43 44   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Reports & Profiles





Subjects