Google Search

Search

Already a Member ?

Best Business Opportunities in West Bengal- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mineral: Project Opportunities in West Bengal

PROFILE:

A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. India is one of the world's most naturally endowed lands. India is home to numerous minerals which benefit the country economically. The minerals produced in India constitute one-quarter of the world's most popular mineral resources.

RESOURCES:

West Bengal stands third in the country in terms of mineral production. The state contributes about one-fifth to the total production of minerals in the country. Coal constitutes 99% of the minerals extracted in West Bengal; fireclay, china clay, limestone, copper, iron, wolfram, manganese and dolomite are mined in small quantities. There are good possibilities of obtaining mineral oil and natural gas in the areas near the Bay of Bengal.

West Bengal is the third largest state for coal production, accounting for about half of India's total. Lignite mined in Darjeeling is used to make briquettes. West Bengal ranks next to Bihar and Madhya Pradesh in production of fireclay. China clay used in the pottery, paper, textile, rubber and paint industries are unearthed at Mohammad Bazar in Birbhum and Mejia in Bankura. Limestone which is used in cement industry is mined in Bankura, Purulia, Darjeeling and Jalpaiguri. There are copper mines in Jalpaiguri and Darjeeling. Small quantities of low quality iron-ore are mined in Bardhaman, Purulia, Birbhum and Darjeeling. There are manganese in the Jhargram region of Paschim Medinipur, Purulia and Bardhaman. The state’s production of dolomite comes from the Dooars region of Jalpaiguri.

GOVERNMENT POLICIES:

Keeping pace with the liberalised Mineral Policy being adopted by the Government of India, Government of West Bengal has formulated its Mineral Policy in 2002. Among the basic objectives of the West Bengal Mineral Policy, 2002 following are worth mentioning:

1. To review the existing State monopolies over mineral exploration and wherever required, go in for selective de-reservation.

2. To invite private capital, resources and technology, both foreign and domestic, for better exploration and exploitation;

3. To promote necessary linkages for smooth and uninterrupted development of mineral based industries to meet the needs of the State.

4. To ensure proper vigilance and supervision of mining activities with particular emphasis on simplification of procedures and greater generation of revenues from mineral resources.

5. To develop industry friendly facilities in specific minerals like, Coal, Granite and China Clay and in Natural gas like Coal bed Methane.

 

Iron and Steel: Project Opportunities in West Bengal

PROFILE:

India has one of the richest reserves of all the raw materials required for the industry, namely land, capital, cheap labour, iron ore, power, coal etc. Yet India is 5th in the world ranking for production of steel. Iron and steel is basis for laying the vibrant Indian industry. Production of steel has come to exist as an index of a country's potential, industrial and economic growth. The making of iron and steel had been known to the people of India since long. The iron pillar of Delhi is a proof of it and speaks of the quality of steel produced in this country in ancient times. The steel industry is often considered to be an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development. The per capita usage of steel gives an indication of the technological advancement of a nation.

RESOURCES:

The growth of steel industry in the State is largely related to the proximity of raw materials, skilled manpower, port facilities and the vast market for steel products. Given these location advantages, large numbers of mini integrated steel plants have already been set up in the state manufacturing a wide range of products such as sponge irons, mild steels, iron pipes etc. The neighbouring Eastern States of India viz. Jharkhand, Orissa and Chattisgarh are endowed with huge iron ore reserves along with cooking coal and non-cooking coal. The establishment of Bengal Iron Works at Kulti in Burdwan district of West Bengal in 1870 where the first commercial blast furnace was set up in 1875 heralded the commencement of this industry in the State.

The easy availability of power, competitive rates of freight, close proximity to areas with natural resources relevant to the industry, and labour force traditionality skilled in operating iron and steel units are factors that have influenced the surge in investment in this sector.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Leather: Project Opportunities in West Bengal

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The Indian leather sector meets 10% of global finished leather requirement. The leather industry is spread in different segments, namely, tanning & finishing, footwear & footwear components, leather garments, leather goods including saddlery & harness, etc.

RESOURCES:

West Bengal has been functioning as a vast raw material resource base for the leather industry in the form of hides and skins. However, Indian leather export has undergone a transition from the export of raw hides and skins in the fifties to value added finished leather in the nineties. In the context, leather processing industries in West Bengal needed a strong structural support and proposal was mooted for setting up an eco-friendly complex near Calcutta with modern technical and training facilities. In this full scale integrated leather complex, facilities for leather-finishing, computer-aided design centres, modern training centre for up gradation are also being provided. This mega complex will also have manufacturing units to produce footwear uppers, finished foot wears, leather goods and garments to catering to the expanding domestic and export markets. The availability of a wide range of cost effective leather chemicals with consistent quality is crucial for the success of such a mega complex. Entrepreneurs can set up manufacturing units in the mega complex for both tanning chemicals and post-tanning chemical auxiliaries.

 

GOVERNMENT POLICIES:

Government policies in support of the industry are:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semifinished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme 

 

Petrochemicals: Project Opportunities in West Bengal

PROFILE:

The petrochemical industry in India has been one of the fastest growing industries in the country. Since the beginning, the Indian petrochemical industry has shown an enviable growth rate. This industry also contributes largely to the economy of the country and the growth and development of manufacturing industry as well. It provides the foundation for manufacturing industries like construction, packaging, pharmaceuticals, agriculture, textiles etc.    

RESOURCES:

The state of West Bengal accounts for almost 4% of India’s production of petroleum products and 13% of India’s polymer production. The production has almost doubled in the last decade. Crude throughput at Haldia refinery increased to 5,502 million tones and its capacity utilization increased to 91.7% during 2005-06.

The growth of the Petrochemical sector has been very impressive both in terms of units set up and investment volume. The main reason for the recent growth of this industry is due to upstream and downstream industry linkages by the oil refining and petrochemical units set up in the state. The industry is due to receive a further fillip with the announcement of US$ 1 billion gas pipeline project to bring natural gas in the state. Haldia Petrochemicals Ltd. is India’s second largest integrated petrochemical complex. Currently producing 1.5 million tons of polymers and chemicals and has grown significantly to its present turnover of US$ 1.4 billion.

GOVERNMENT POLICIES:

The major thrust areas of the policy are:

•        Encourage public sector companies & nationalized banks to enter the capital market to raise resources & offer new investment avenues.

•        Invite & encourage private sector investment in these industries in order to accelerate growth.

•        Set up Petroleum, Chemical & Petroleum Investment Regions (PCPIR) in the state to promote investment on a global scale.

•        Foreign Technology investments will be invited in the petrochemical industries.

•        Encourage Foreign Equity participation in the petrochemical industries.

 

Food Processing: Project Opportunities in West Bengal

PROFILE:

Indian food processing industry is widely recognized as a 'sunrise industry' having huge potential for uplifting agricultural economy, creation of large scale processed food manufacturing and food chain facilities, and the resultant generation of employment and export earnings. The food processing sector in India is geared to meet the international standards. Food Safety and Standards Authority of India has the mandate to develop standards and also to harmonise the same with International Standards consistent with food hygiene and food safety requirement and to the conditions of India's food industry.

RESOURCES:

West Bengal is one of the three front running states in India in food and agro processing sector. Fruits, vegetables and cereals grow in abundance in West Bengal. The state accounts for 30% of potatoes, 27% of pineapples, 12% of bananas and 16% of India’s rice production. Additionally fruits like mangoes, papaya, guava and jackfruit and vegetables like tomatoes, cauliflowers, cabbage, brinjal, pumpkin, are available in plenty.

West Bengal is the largest producer of rice, pineapple, vegetables and fruits in the country and second largest producer of potatoes and lychees. It ranks 1st in total meat production (including poultry) in the country and accounts for 10% of the country’s edible oil production. It is a substantial producer of spices, coconut, cashew nut, arecanut, betel vine and oilseeds. West Bengal is also one of the leading states in pisciculture since it the largest producer of fish.

GOVERNMENT POLICIES:

Agro & Food Processing Industries form a very important part of the State’s economy. The West Bengal Government is setting up a number of policies & plans to focus on the selected areas like vegetables, fruits, fisheries, rice, poultry, dairy & floriculture. The major thrust areas of the policy are:

•        Increase agricultural production & productivity vertically through wider adoption of appropriate eco-system-specific & cost effective technology.

•        Bring more area under High Yielding Variety (HYV), hybrid & improved varieties of crops.

•        Emphasize increase production of pulses & oil seeds in non-traditional areas & non-conventional seasons.

•        Create employment opportunities in this sector to improve the socio-economic status of the farmers & also to remove sub-regional disparity.

•        Extending soil-testing facilities up to district level for proper use of fertilizer.

•        Post-harvest technology for reducing loss & better marketability.

•        Bring cultivable waste land & fallow land under cultivation.

•        Application of low cost technology for increasing production & productivity.

•        More money involvement in agriculture.

•        Encourage private entrepreneurship for processing of fruits, vegetables & horticultural items.

•        Promote floriculture parks & flower complexes in the state.

•        Other Business Process, knowledge Process and Engineering Process Outsourcing services

The State Government is encouraging the farmers for mechanization through the use of modern agricultural implements & machines for timely farm operation & reduction in the cost of cultivation.

 

Textiles: Project Opportunities in West Bengal

PROFILES:

The Indian textile industry is one of the largest industries in the world. The textile industry in India is the largest provider of employment after agriculture. This industry is one of the earliest industries of India to come into being; it is presently the second biggest industry in the world after China. Over the years, this industry has proved to be the provider of the basic requirements of the people. The industry holds a vital place in the Indian economy as it makes a contribution of 14 % to the industrial production of the country and at the same time sums up 4% of the total GDP of India. Along with contributing to the Indian economic scenario in terms of employment, involvement in the industrial production, foreign revenues the textile industry of India also contributes to the global textile economy. It contributes to the global textile fibre and yarn production.

RESOURCES:

The textile industry of Kolkata plays a significant role in the economy of the capital city of the state of West Bengal. West Bengal has traditionally been a major producer of cotton textile as well in the country. Jute textile manufacturing is the most prominent industry in West Bengal due to availability of raw jute in the state. At present there are 59 Jute mills in West Bengal. Main jute products are Hessian, sacking, jute bags, and other items produced by jute. Most of the jute mills are located on the banks of river Hooghly near Kolkata. West Bengal is the leader and pioneer in the country for the manufacturing of Jute textiles. Hosiery industry in West Bengal has a huge grow potential as Bengal was the birthplace of hosiery industry in India.

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995 Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Biotechnology: Project Opportunities in West Bengal

PROFILE

The Indian biotechnology sector is one of the fastest growing knowledge-based sectors in India and is expected to play a key role in shaping India's rapidly developing economy. With numerous comparative advantages in terms of research and development (R&D) facilities, knowledge, skills, and cost effectiveness, the biotechnology industry in India has immense potential to emerge as a global key player. Biopharma and bioservices sectors contributed 63 per cent and 33 per cent, respectively, to the total biotech exports. The bioagriculture, bioindustrials and bioinformatics sectors remained focussed on domestic operations, bringing in nearly 90 per cent of their revenues from India.

RESOURCES

West Bengal has a vast knowledge base with few of the premiers institutes of India located here.          Presence of Kharagpur IIT which over the years have done path breaking research in this sector is a major resource of biotechnology development. It has rich bio diversity, characterized by several species of medicinal & aromatic plants and diverse agro climatic zones. A matrix of 75 deliverable products is ready for commercialization in the agro and medical sector. Increase awareness among people about the adverse side effects of synthetic drags.

GOVERNMENT POLICIES:

The state has been putting efforts to facilitate the growth of biotech industries and development of clean biotech technologies. The various key initiatives under this section include:

•        Conserve bio-diversity through mapping and sustainable use of bio-resources.

•        Create a "Centre of Excellence for Biotechnology" as a high quality support service to Biotech Industries.

•        Facilitate the flow of venture capital funds and bank credit to Biotech companies.

•        Spread general awareness for optimum utilisation of Biotechnology in the agriculture sector.

 

Automobile and auto components: Project Opportunities in West Bengal

PROFILE:

The Indian auto industry has the potential to emerge as one of the largest in the world. Presently, India is second largest two wheeler markets in the world, fourth largest commercial vehicle market in the world. 11th largest passenger car in the world and is expected to be the seventh largest market by 2016. The growth is a reflection of the emergence of India as a global automobile hub with almost all global auto makers having set up plants in India to cater mainly to the domestic market, as also the export market. The Indian auto component industry has kept pace with technological developments and is today catering not only to OEM and Tier I auto makers in India but abroad as well. Many Indian auto part makers have today also succeeded in emerging as the supplier of choice to global auto majors.

RESOURCES:

West Bengal has traditionally been very strong in the engineering industries and has been an important manufacturing base in the past. West Bengal’s Hindustan Motors was one of the pioneers by commencing production of vehicles in the state in the year 1948. Recently it has collaborated with Mitsubishi Company of Japan to diverse into a wide range of cars and manufactures everything related to automobile industry like trekkers, trucks, and also luxury cars like Mitsubishi Lancer and touching a consolidated net sale of US$ 233.47 million in the last fiscal year. West Bengal realizing this huge potential in this sector has geared up with appropriate plans and policies to boost this sector. Also it has got certain inherent competitive advantages since the state is located in the heart of India’s steel and manufacturing cluster.

 

GOVERNMENT POLICIES:

A number of policy initiatives have been taken by the government to facilitate the automotive industry. These include:

•        Permitting 100% FDI in this sector & removal of minimum capital investment norm for fresh entrants.

•        Establishing an international hub for manufacturing small, affordable passenger cars & a centre for manufacturing two-wheelers.

•        Conducting incessant modernization of the industry & facilitate indigenous design, research & development.

•        Leveraging State’s software technology into automotive technology wherever relevant.

•        Encouraging development of vehicles propelled by alternate energy sources.

•        Development of domestic safety & environmental standards at par with the international standards.

•        Emphasis on low emission fuel auto technologies & availability of appropriate auto fuels.

The State is also encouraging dynamic investment in the sector to create an environment for volume production & indigenous capability for small cars & auto parts.

 

Tea: Project Opportunities in West Bengal

PROFILE:

Tea is indigenous to India and is an area where the country can take a lot of pride. This is mainly because of its pre-eminence as a foreign exchange earner and its contributions to the country's GNP. In all aspects of tea production, consumption and export, India has emerged to be the world leader, mainly because it accounts for 31% of global production. It is perhaps the only industry where India has retained its leadership over the last 150 years. Tea production in India has a very interesting history to it. The range of tea offered by India - from the original Orthodox to CTC and Green Tea, from the aroma and flavour of Darjeeling Tea to the strong Assam and Nilgiri Tea- remains unparalleled in the world.

RESOURCES:

West Bengal is the second largest tea growing state in the countryl contributing almost 21% of the total production in the country. There are three tea-growing zones in the state;       Darjeeling,          Terai and Dooars. Darjeeling tea is considered to be the finest in the world. There are 343 tea gardens in West Bengal covering 1,03,950 hectares planted area. Some of the major players in the Tea industry in West Bengal include Tata Tea Ltd, James Finlay & Company. Both of them together are representing world’s second largest global branded tea operations with product and brand presence in over 50 countries. Goodricke Group Ltd. (GGL) a part of the UK-based Cammelia Plc, the world’s single largest tea producer in the private sector. In India it is the third largest tea producer and the leading producer of Darjeeling tea.

GOVERNMENT POLICIES:

The tea industry in India is highly regulated. It requires licenses for its import or export. While The Tea Act, 1953 controls production and distribution activities, the Tea (Marketing) Control Order, 2003 regulates tea sales and stipulates that a defined percentage of tea produced from each garden be sold through the auction system. In addition to this central cess, States also levy sales tax on sale of tea. Profits from production and sale of tea are subject to agricultural income tax by the states. Thus, the residual income after paying corporate tax is taxed again. This tax is levied on profits accruing to gardens located in respective state. 100% foreign direct investment (FDI) in tea industry is permitted subject to compulsory divestment of 26% equity of the company in favour of an Indian partner / Indian public within five years from the date of investment.

 

Tourism: Project Opportunities in West Bengal

PROFILE:

Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. India's rich history and its cultural and geographical diversity make its international tourism appeal large and diverse. It presents heritage and cultural tourism along with medical, business and sports tourism. India has one of the largest and fastest growing medical tourism sectors.

RESOURCES:

West Bengal has the widest variety of attractions in terms of tourist spots from the bustling Kolkata Megapolis with its historical and modern charms, to the zones of tranquillity like the Himalayan terrain in the north to the Sunderbans in the south. The state is endowed with all the diversities of nature that is a tourist’s dream. From the arid Chhota Nagpur plateau region in the west, forests in the north and south, mountains in the north, sea beaches in the south and rivers crisscrossing the whole of the state the varied panorama offers the discerning traveller a very wide choice and caters to the requirements of varied travel segments. More specifically, the snow capped peaks of the Himalayas, Darjeeling, referred by many as the Queen of the Hill Stations, the Darjeeling Himalayan Railway declared as a World Heritage Site, the vast tea estates of the Dooars, the famed Royal Bengal Tiger of Sunderbans, the innumerable historical landmarks of India’s and Bengal’s glorious history are all wonders for the prospective tourists.

GOVERNMENT POLICIES:

In order to develop tourism in India in a systematic manner, position it as a major engine of economic growth and to harness its direct and multiplier effects for employment and poverty eradication in an environmentally sustainable manner, the National Tourism Policy was formulated in the year 2002. Broadly, the “Policy” attempts to:-

•        Position tourism as a major engine of economic growth;

•        Harness the direct and multiplier effects of tourism for employment generation, economic development and providing impetus to rural tourism;

•        Focus on domestic tourism as a major driver of tourism growth.

•        Position India as a global brand to take advantage of the burgeoning global travel trade and the vast untapped potential of India as a destination;

•        Acknowledges the critical role of private sector with government working as a pro-active facilitator and catalyst;

•        Create and develop integrated tourism circuits based on India’s unique civilization, heritage, and culture in partnership with States, private sector and other agencies; and

•        Ensure that the tourist to India gets physically invigorated, mentally rejuvenated, culturally enriched, spiritually elevated and “feel India from within”.

 

Waste Management: Project Opportunities in West Bengal

PROFILE:

Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity, and the process is generally undertaken to reduce their effect on health, the environment or aesthetics. Waste management is a distinct practice from resource recovery which focuses on delaying the rate of consumption of natural resources. The management of wastes treats all materials as a single class, whether solid, liquid, gaseous or radioactive substances, and tried to reduce the harmful environmental impacts of each through different methods.

RESOURCES:

There are 609 hazardous waste generating units in West Bengal. Amongst the nineteen districts of the state, two districts (Darjeeling and South Dinajpur) do not generate hazardous waste. The total quantum of hazardous waste generation from West Bengal is 2,59,776.24 metric tonnes per annum. (MTPA), out of which 46 per cent (1,20,596.41 MTPA) is landfillable, 49 per cent (1,26,596.38 MTPA) is recyclable and the remaining 5 per cent (12,583.45 MTPA) is incinerable by nature. Interestingly, it was observed that the majority of hazardous waste generating units in the state is small and is generating meagre quantity of waste, whereas the units generating substantial amount of hazardous wastes are limited in number.

 

GOVERNMENT POLICIES:

The Central Government notified the Municipal Solid Wastes (Management & Handling) Rules 2000 under Sections 3, 6 and 25 of the Environment (Protection) Act 1986 for the purpose of managing municipal and urban wastes/garbage in an environmentally sound manner. Government of West Bengal are the nodal agencies for technical guidance and preparation of project report for the development of municipal solid waste management plan for the municipal authorities situated within Kolkata Metropolitan Area (KMA) and Non-KMA areas respectively. National policy on waste management is set out in the October 1998 policy statement on waste management- Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 38 of 294 | Total 2936 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 38 293 294   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Thermocol Moulded Items Plates and Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic glass and plates are manufactured by thermoforming technique. They are fast replacing conventional glass and plates. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass and cups business can never comes down. Instead of using porcelain or other material made plates these disposable plates, glass and cups are best alternate which comes in budget. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Glasses: 64,800 Kgs/Annum Thermocol Plates : 211,200 Kgs/AnnumPlant & machinery: Rs 30 lakhs
Working capital: -T.C.I: Cost of Project : Rs 109 lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Moulded Items Plates and Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic glass and plates are manufactured by thermoforming technique. They are fast replacing conventional glass and plates. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass and cups business can never comes down. Instead of using porcelain or other material made plates these disposable plates, glass and cups are best alternate which comes in budget. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Glasses: 64,800 Kgs/Annum Thermocol Plates : 211,200 Kgs/AnnumPlant & machinery: Rs 30 lakhs
Working capital: -T.C.I: Cost of Project : Rs 109 lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Industrial Safety Leather Shoes

An Industrial Safety Leather Shoes steel-toe boot is a durable boot or shoe that has a protective reinforcement in the toe which protects the foot from falling objects or compression, usually combined with a mid sole plate to protect against punctures from below. Safety footwear now comes in many styles, including sneakers and clogs. Some are quite formal, for supervising engineers who must visit sites where protective footwear is mandatory. There are a number of different professions which require that safety shoes and personal protection equipment are worn, in order to avoid the risk of incidents and work hazards while at the job. They include the danger of slipping, suffering electric shock, chemical burns, breaking a toe or foot from a falling or rolling object and others. India is the second largest global producer of footwear after China, accounting for 9% of the global annual production of 22 billion pair as compared to China’s share of more than 60%. India annually produces ~2.1 billion pair of which, ~90% are consumed internally while remaining are exported primarily to European nations.The global industrial protective footwear market is anticipated to witness a significant growth over the forecast period, owing to the compliance with stringent regulations, mandating an elevated standard of worker and workplace safety across organizations, along with the growing concerns regarding workplace safety across the world.The global industrial protective footwear market size is expected to reach USD 6.56 billion by 2024.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Bata India Ltd • Faizan Shoes Pvt. Ltd. • Florind Shoes Pvt. Ltd. • Lakhani India Ltd. • Liberty Shoes Ltd. • Marina Shoes Ltd.
Plant capacity: 300,000 Pairs/AnnumPlant & machinery: Rs 90 lakhs
Working capital: -T.C.I: Cost of Project: Rs 359 lakhs
Return: 27.00%Break even: 73.00%
Add to Inquiry Add to Inquiry Basket

Fruit Juice and Fruit Pulpy With Packaging

A freshly squeezed orange or fresh pulped and strained apple would supply a fruit juice drink for immediate consumption, but to expect it to maintain its quality for even a day or two was tempting providence. Nowadays, with the benefit of ultra-high temperature (UHT) pasteurisation, aseptic packaging techniques and systems, pressed juices can be stored for extended periods with very little deterioration in quality. Previously, reliance had to be places upon the use of preservatives and ‘classical’ pasteurisation at lower temperatures (70ºC+) and longer holding times. As businesses grew and production and filling lines enlarged and developed, so did understanding of the need for correct sanitization of the plant items. The progressive nature of the soft drinks industry has meant that throughout its history there have been many innovative developments, and in the early years these centred on the filling and packaging, or containedrising, of beverages. During the second half of the twentieth century, apart from the continuous move towards more efficient means of production and marketing of bottled or canned soft drink products, there was much progress in our knowledge of the constituents responsible for perceived flavour notes. Advances in instrumental analytical techniques have made it possible to identify those chemicals in natural extracts (whether of fruit or botanical origin) that provide the characteristic flavour profile. Changes in lifestyles and awareness regarding the consumption of a healthy and balanced diet have steered the growth of the global juice market. As a result of the growing consumption of vegetable and fruit juice, the global market for juice is likely to witness strong growth over the forthcoming years.The market for fruit & vegetable juice has grown at a steady rate over the last five years.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Capricorn Food Products India Ltd. • Dabur Foods Ltd. • Foods & Inns Ltd. • Maa Fruits India Pvt. Ltd. • Surya Fresh Foods Ltd. • Manpasand Beverages Ltd
Plant capacity: Mango Juice : 600,000 Ltrs/Annum Orange Juice : 600,000 Ltrs/Annum Pipeapple Juice : 600,000 Ltrs/Annum Mosami Juice : 600,000 Ltrs/Annum Mixed Fruit Juice : 600,000 Ltrs/Annum Mango Pulpy:300,000 Ltrs/Annum Orange Pulpy:: 300,000 Ltrs/AnnumPlant & machinery: Rs 83 lakhs
Working capital: -T.C.I: Cost of Project : Rs 809 lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Edible Oil Refinery (Sunflower Oil, Groundnut Oil & Rice Bran Oil)-Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Edible oils are a major source of nutrition. The fatty acids in edible oils are required by the body as a vehicle for carrying vitamins, and they provide energy which is twice that of the cereals. Sunflower oil is the non-volatile oil expressed from sunflower (Helianthus annuus) seeds.Groundnut is the major oilseed crop in India accounting for 45% of oilseed area and 55% of oilseed production in the country.Rice bran oil produced is mostly used for industrial purposes particularly in the soap industry and when intended to edible purposes they are further subjected to refining treatment. Oil seeds occupy a prominent position among the farming commodities in India, perhaps next only to the food crops. India occupies a premier position among the oil seeds producing countries of the world, accounting for about 10 per cent of the total output of vegetable oils and fats. It is the largest producer of ground nut, rapeseed mustard and sesame; second in respect of castor seed production, third in coconut production, forth in cottonseed and fifth in linseed. With around 8% of world oilseeds production, over 7% of global protein mealproduction, around 4% of world oil meal export, total oilseeds production of 23 mn tonne and 5.6 mn tonne of edible oil production, India is the fourth largest edible oil economy in the world valued at USD 16.5 bn (Rs. 660 bn).Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • 3 F Industries Ltd. • A D M Agro Inds. Latur&Vizag Pvt. Ltd. • Acalmar Oils & Fats Ltd. • Dhara Vegetable Oil & Foods Co. Ltd. • EmamiAgrotech Ltd. • Gemini Edibles & Fats India Pvt. Ltd.
Plant capacity: Sunflower Oil : 5,000,000 Kgs/Annum Groundnut Oil : 5,000,000 Kgs/Annum Rice Bran Oil: 5,000,000 Kgs/AnnumPlant & machinery: Rs 806 lakhs
Working capital: -T.C.I: Cost of Project : Rs 1718 lakhs
Return: 27.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Fruit Pulp ,Mango, Guava, Pomegranate, Papaya- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities,

Fruit pulp is prepared from selected varieties of fruits. Fully matured fruits are harvested and quickly transported to the fruit processing plant. The fruits are ripened in controlled ripening chambers or natural ripening in open yard. Fully ripened fruits are washed, pulped, deseeded, centrifuged, homogenized, thermally processed and filled hot to maintain sterility. Fruit Pulp/Concentrate is perfectly suited for conversion to juices, nectars, drinks, jams, fruit cheese and various other kinds of beverages. They can also be used in puddings, bakery fillings, fruit meals. Food processing sector of India plays a vital role in improving the value addition opportunities and creating surplus food for agro-food products. Presently, a mere 2.2 per cent of fruits and vegetables are processed. The National policy of India aims to increase the percentage of food being processed in the country to 10 per cent by 2016 and 25 per cent by 2025. Food processing adds value, enhances shelf life of the perishable agro-food products and encourages crop diversification. The major markets for fruit concentrates and puree market are European Union, the Middle East and the U.S. Fruit juices, concentrates and purees are traded internationally and used by a variety of industries; mainly the beverages industry. Beverage industry is the largest end-user of concentrates and purees, producing numerous drinks, nectars and syrups. Mango concentrate is base ingredient for all drinks.As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product. Few Indian Major Players are as under • Canfruit Export India Ltd. • Capricorn Food Products India Ltd. • EnkayTexofoodInds. Ltd. • Fortune Foods Ltd. • Navaras Food • Tricom Fruit Products Ltd.
Plant capacity: Mango Pulp : 1200 MT/Annum Guava Pulp: 1200 MT/Annum Pomegranate Pulp: 1200 MT/Annum Papaya Pulp: 1200 MT/AnnumPlant & machinery: Rs 66 lakhs
Working capital: -T.C.I: Cost of Project: Rs 379 lakhs
Return: 28.00%Break even: 70.00%
Add to Inquiry Add to Inquiry Basket

Baby Wet Wipes and Facial Wet Tissues - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A wet wipe, also known as a wet towel, or a moist towelette, is a small moistened piece of paper that often comes folded and individually wrapped for convenience. Wet wipes are used for cleaning purposes, like personal hygiene or household cleaning. Wet wipes are produced as air-laid paper where the fibres are carried and formed to the structure of paper by air or with nonwoven spun-lace fabric where fibers are intermingled with hydro entanglement through very high pressure of water. They are moistened with water or other liquids like isopropyl alcohol depending on the applications. The wet tissues market is a growing business. Besides cleansing tissues like wet toilet paper, baby wipes or hard surface wipes other products such as sun protection lotion or deodorants are offered as wipes. The wet tissue liquids are mostly aqueous, the cellulose is a good nutrient, the non-woven is always moderately contaminated with microorganisms and the storage temperature is nearly optimal for microbial growth. The personal care wipes market has seen consistent growth worldwide over the past decade, and there are no signs of a slowdown. According to market survey, the retail volume for personal care wipes has nearly doubled, from 93 billion units to almost 170 billion units sold, respectively. India tissue market grew with a CAGR of about 8.05% in the period of five years from 2010 to 2015, whereas wipes market has showcased the CAGR of 15.21% during the same analysis period. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Ginni Filaments Ltd. • Himalayan Skincare Pvt. Ltd. • Hindustan Unilever Ltd. • Johnson & Johnson Pvt. Ltd. • Kimberly Clark Lever Pvt. Ltd. • Pamwi Tissues Ltd.
Plant capacity: Baby Wet Wipes (100 Pcs/ Pkt.) : 3,600,000 Pkts/Annum Facial Wet Tissues (30 Pcs/ Pkt.): 3,600,000 Pkts/AnnumPlant & machinery: Rs 142 lakhs
Working capital: -T.C.I: Cost of Project: Rs 842 lakhs
Return: 29.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

Copper Powder By Electrolytic Process - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Copper makes vital contributions to sustaining and improving society. Copper's chemical, physical and aesthetic propertiesmake it a materialof choice in a wide range of domestic, industrial and high technology applications.The electrolytic method is probablythe most economical method for producingcooper powder; moreover the copper powder obtained from this method is the highest quality. Copper powders have been used in industrial applications for many years. Probably the best known is the self-lubricating bearing which was the first major application and still accounts for about 70% of the copper powder used. Pure copper powder is used in the electrical and the electronics industries because of its excellent electrical andthermal conductivities. Copper in powder form is used in structural parts and friction materials. The electrical industry claims a share of about 26%. The electronics and communications take another 30% share. With building construction (9%) and transportation (8%) added, the cumulative rises to about three-fourths. The other consuming sectors are engineering process and general (9%) and consumer durables (6%). Defence is also a substantial user. Another important consumer is handicraftswhich is reported to consume close to 12% of copper in India. The pioneer of copper production in India, the PSU, Hindustan Copper has charted a programme to undertake capacity expansion of 8 mines from 3.2 mntonne annually to 12.4 mntonne by end 2016-17. The projects involve an investment of USD 735 mn. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Bimetal Bearings Ltd. • G S Organics Ltd. • Gleitlager (India) Ltd. • Mepco Industries Ltd.
Plant capacity: Copper Powder : 15,000 MT/AnnumPlant & machinery: Rs 307 lakhs
Working capital: -T.C.I: Cost of Project: Rs3050 lakhs
Return: 31.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Low Carbon Ferromanganese - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

High Carbon Ferro- manganese containing about 7% carbon is not suitable for the production of steels or other alloys containing manganese in which it is desired to maintain the carbon at low level. For the manufacture of such materials the manganese must be added either as the relatively pure metal or in the form of an addition alloy with a low content of carbon. It is a Ferro alloy with high content of manganese. It gives strength to steel and is used in making of high tension steel.Low carbon Ferro manganese is widely used in the manufacturing of tool steels, alloys steel & structural steels. Its property causes it to have a high affinity with sulphur in the steel and on combining produces Manganese Sulphide (MnS) which floats up to the metal surface. Low Carbon Ferro Manganese is used as a de-oxidizer and hence finds its usage in the manufacture of 18-8 Austenitic non magnetic stainless steel. The demand for ferro alloys has been increasing with that of alloy and special steels. There are about a dozen leading players and over 30 small producers. The industry has tied up with companies in Europe for technology inputs. The major users of alloy steel are: auto industry, railways, forgings, tubes, springs and other engineering industries.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Acme Ferro Alloys Pvt. Ltd. • Anjaney Ferro Alloys Ltd. • Balasore Alloys Ltd. • Impex Ferro Tech Ltd. • Indian Metals & Alloys Ltd. • Indsil Hydro Power & Manganese Ltd.
Plant capacity: Low Carbon Ferromanganes : 15,000 MT/AnnumPlant & machinery: Rs 371 lakhs
Working capital: -T.C.I: Cost of Project : Rs 2804 lakhs
Return: 27.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Low Carbon Silicomanganese - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Low Carbon Silico Manganese which is popularly known as LCSiMn is a ferrous alloy with content of carbon, silica and manganese. A large number of steel producing companies extensively demand low carbon silico manganese for reducing total production treatment by using these at the time of slag reduction instead of HCFeMn and decarburization process. Low level carbon silico manganese is extensively appreciated for reducing the lining attack that may cause due to less fluid slag (less MnO).Low Carbon Silicomanganese, used during slag reduction instead of High Carbon Ferromanganese during decarburization, reduces the total treatment time. This also reduces the amount of oxidized manganese, and therefore the quantity of silicon needed in the slag reduction. With the growing demand of steel in the market, there has been a heavy requirement of manganese alloys. This is one of the most probable reasons as to why the manganese industry is on the bloom. After witnessing a downfall, Silico manganese prices are now slightly stable; and increased by INR 1,000-2,000/MT with demand dented as buyers were retreating due to diminishing steel margins. Silico manganese producers are clamoring to offload stock. The Indian ferroalloys producers are reportedly cutting down their Manganese alloy production and would like to exhaust stocks to enable steady cash flows amid thin price margins. Due to cutting down in production of ferro alloys, prices may increase further in a short period. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Acme Ferro Alloys Pvt. Ltd. • Balasore Alloys Ltd. • Hi-Tech Electrothermics& Hydro Power Ltd. • Jagat Alloys Pvt. Ltd. • Padmavati Ferrous Ltd. • Shri Girija Alloy & Power (India) Pvt. Ltd.
Plant capacity: Low Carbon Silicomanganese: 15,000 MT/AnnumPlant & machinery: Rs 1422 lakhs
Working capital: -T.C.I: Cost of Project : Rs 3936 lakhs
Return: 28.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 38 of 294 | Total 2936 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 38 293 294   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top