Best Business Opportunities in Manipur - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Manipur is a state in north Eastern India, with the city of Imphal as its capital. Manipur has been at the crossroads of Asian economic and cultural exchange for more than 2500 years. It has long connected Indian subcontinent to Southeast Asia, enabling migration of people, cultures and religions. Manipur is primarily an agrarian economy, with significant hydroelectric power generation potential.

The natural vegetation occupies an area of about 14,365 km² which is nearly 64% of the total geographical area of the state. The vegetation consists of a large variety of plants ranging from short and tall grasses, reeds and bamboos to trees of various species. Broadly, there are four types of forests - Tropical Semi-evergreen, Dry Temperate Forest, Sub-Tropical Pine and Tropical Moist Deciduous.


Manipur has population of 25.7 Lakhs, an increase from figure of 22.94 Lakh. Total population of Manipur as per 2011 census is 2,570,390 of which male and female are 1,290,171 and 1,280,219 respectively.

Total area of Manipur is 22,327 sq. km. Density of Manipur is 115 per sq km which is lower than national average 382 per sq km. In 2001, density of Manipur was 103 per sq km.

Of the total population of Manipur state, around 67.55 percent live in the villages of rural areas. In actual numbers, males and females were 878,469 and 857,767 respectively. Total population of rural areas of Manipur state was 1,736,236. In rural areas of Manipur, literacy rate for males and female stood at 83.39 % and 67.03 %. Average literacy rate in Manipur for rural areas was 76.20 percent. Total literates in rural areas were 1,142,564.


Least touched and least discovered Manipur promises to be the great tourist discovery of the21st century. An oval shaped valley surrounded by blue green hills, rich in art and tradition has inspired description such as the Switzerland of the East with its cascading rapids, tripling rivers, varieties of flowers, exotic blooms and lakes. The people of Manipur include Meitei, Nagas, Kuki-Chin-Mizo and Gorkhas groups and Muslims and other colorful communities which have lived in complete harmony for centuries.

The Ministry of Tourism has five Regional offices located at Kolkata (East), Mumbai (West), Delhi (North), Chennai (South) and Guwahati (North East), which are headed by an officer of the level of Deputy Director General designated as Regional Director.

Domestic tourists intending to visit Manipur by road via Dimapur/Kohima require Inner Line Permits to pass through Nagaland. These are issued by the Liaison officers of the Government of Nagaland at New Delhi, Calcutta, Guwahati, Shillong and the Sub-divisional officer (Civil), Dimapur, deputy Commissioner, Imphal can also issue permits to tourists traveling by road from imphal to Kohima and Dimapur in Nagaland.


The Information Technology and IT Enabled Services sector in India is looking towards Tier-II and Tier-III cities to meet the growing demands of the industry for sourcing its required skilled manpower. The youth of Manipur have not only excelled in the field of Sports, but have already established a noticeable presence in the ITES industry in India.

Manipur State is striving to score higher on being business-friendly in terms of the available IT infrastructure. These include:

•        Software Technology Parks of India (STPI) unit of Imphal with Earth station and OFC connectivity.

•        Up gradation of IT infrastructure at Imphal to provide modern Business-ready built-up office space for IT/ITES firms.

•        Internet on the move – Various Telcos like BSNL, Tata Indicom, Airtel etc. are providing Wireless Internet across the State.

A high rate of unemployment exists in Manipur, particularly among the educated youth. According to the Live Register of Employment Exchange, the total number of educated job-seekers were recorded as 5, 83.65 thousands.

Manipur is rich in natural resources but due to difficult terrain, inadequate infrastructural facilities and varying climatic conditions, the state could not develop much in the industrial sector of its economy. In the initial stage, Govt. policy in the state was one of revival and revitalization of the traditional handlooms and handicrafts of the local habitats. The contribution of the manufacturing sector to the total gross state domestic product at current prices is found to be 6.17 percent. The trend of industrial development and the present local conditions of the state and in consonance with industrial policy of the Government of India, the Govt. of Manipur in its policy announcement of 1990, has decided to focus attention to the small scale and agro-based industries without discouraging the medium and large-scale industries. It is expected to serve the objective of employment generation and dispersal of industries in rural and urban areas. The state has laid emphasis on creating a strong industrial base and employment opportunities in the state through provision of various growth inducing factors based on locally available resources. It is based on locally available raw materials and minerals. In order to promote rapid industrialization, the State Government has over the years been offering attractive package of incentives and concessions to invigorative industries.

The khadi and Village Industries Commission (KVIC) was established by the Govt. of India in the year 1957. The Khadi and Village Industries is not only providing employment to people in rural and semi-urban areas at low investment per job, but also utilizes local skill resources and provides part-time as well as full time work to rural artisans, women and minorities.

The traditional sector of industries falls within the purview of organizations such as Khadi and Village Industries Commission. The KVIC include artisans in tiny industrial units and defines it as any industry located in a village or town inhabited by population not exceeding 10000 which produces goods and renders services with or without the use of power in which the fixed capital per head does not exceed Rs.15000.

Growth Centres are large villages or small towns which have the potential to become the nuclei for the socio-economic development of the surrounding area. The Growth Centres can be identified by the different orders with respect to the quality and quantity of services and facilities, service area and population. A growth centre of lowest order should have services such as agricultural input centre, primary and middle school, maternity and child care centres and daily market.

Small-Scale Industries (SSI) is an important segment of the economy, contributing substantially in the form of production, employment and exports. It has continued to play a vital role in the fulfillment of socio-economic objectives. The principal factor for defining small-scale Industries has always been based on the size of investment. Small-Scale Industries are those industries whose investment in fixed assets such as plants and machineries does not exceed Rs.100.00 lakhs (Rs.1 Crore). Investment in plant and machinery in respect of industry related Small-Scale Service and Business Enterprises (SSSBE) were increased to Rs.10.00 lakhs from Rs.5.00 lakhs. For speedy growth of small-scale industries, the Government has already brought about simplifications in the SSI registration procedures.

The State Government has introduced this Policy with various components being offered such as, incentives, improved infrastructure facilities, supply of quality power, and credit flow from Bank and Financial institutions, better market linkages and to boost investor confidence.

The Government of Manipur desire Manipur to be a preferred destination for industrial and trade activities and achieving to the aspiration of the people of Manipur, thereby affording to –

•        All round economic development and to improve living standards.

•        To create employment opportunities, skill development and self

•        Employment opportunities.

•        Optimal utilization of both natural and physical resources.


•        Develop adequate infrastructures to ensure planned and accelerated industrial development.

•        Promote maximum capital investment in the State for economic activities resulting in employment opportunities, improving standard of living of people at large and all-round development of the State.

•        Promote modernization and technology up-gradation of existing industrial units.

•        Encourage quality control, standardization and competitiveness of local products.

•        Promote eco-friendly industries.


•             Agro based industry 

•             Bio-Technology industries.

•             Floriculture. 

•             Handloom and Handicraft.

•             Medicinal Plants.

•             Distillation of oils from aromatic plants.

•             Mineral based industries.

•             Information Technology Trade and Commerce under Export Import mechanisms.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 21 of 28 | Total 276 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 27 28   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

MACARONI, VERMICELLI & ATTA NOODLES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Macaroni are made from wheat flour, carbonic salt water, pure salt, soft water and other additives. Carbonic salt water with sodium or potassium carbonate as the main constituent is an important additive giving the stickiness, elasticity, smoothness and good taste. Mixing or compounding wheat powder and additives (powder state) or their solution, is the most important factor deciding the quantity of the dough (paste state) of the additives are incorporated, with wheat powder, either dissolved or dispersed in carbonic salt solution or in emulsion state. The quantity of water and salt used in the process differs in summer and winter, as viscosity and osmotic pressure are sensitive to temperature. Vermicelli is the symbol of religious festivals in India. It is prepared at the occasion of Rakshabandhan in the Hindu custom and at the occasion of Id-ul-fitter in the Muslim custom. Besides, it is regularly consumed by so many families as a sweet-dish, or curry or fired and salty. Atta instant noodles is a ready to cook and serve snack food which has become very popular in India in the recent years The noodles must contain 5.5% of the solids of eggs as percent of the total solid in the finished product. The egg solids can be put into the product by addition of frozen yolks, dried yolks, frozen whole eggs, dried whole eggs, or fresh whole eggs or yolks. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Indo Nissin Foods Ltd. • M T R Foods Pvt. Ltd. • Nestle India Ltd. • Om Oil & Flour Mills Ltd. • Surya Agroils Ltd.
Plant capacity: Macaroni :1MT/Day •Vermicelli : 1MT/Day •Atta Noodles: 1MT/DayPlant & machinery: Rs 33 Lakhs
Working capital: -T.C.I: Total Cost Of Investment:Rs 151 Lakhs
Return: 45.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

METHYL METHACRYLATE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Methyl methacrylate (MMA) is an organic compound with the formula CH2=C(CH3)COOCH3. This colourless liquid, the methyl ester of methacrylic acid (MAA) is a monomer produced on a large scale for the production of poly(methyl methacrylate) (PMMA) but another major application is in surface coatings. MMA is also used as co monomer in methyl methacrylate butadiene styrene resins, used as a modifier for polyvinyl chloride (PVC). Methyl Methacrylate Monomer offers significant advantages as an additive in a wide range of copolymer-based products and is used in molding and extruded resins and extruded sheet (PMMA), in mineral surface composites, and coatings. Emerging uses of MMA in digital signboards and displays in the advertising industry and in optical applications such as LCD, LED screens, and flat panel displays in the electronics industry are stimulating growth in the market. Growing healthcare spending is spurring demand for PMMA in the production of medical devices. MMA is used for the production of pure or almost pure homopolymers (PMMA), but there is also wide variety of copolymer uses. Within the PMMA consumption categories, the largest is for cast and extruded transparent acrylic sheet (PMMA sheet). Liquid crystal displays : Acrylics is used in Liquid Crystal Displays (LCD) and the current and projected growth for large LCD screens for home theatre etc. has been a major driver for MMA expansions, especially in Asia, where virtually all the LCD manufacturing market is now concentrated. Moulding resins : MMA is used in the production of moulding resins (excluding the resin beads prepared for extruded acrylic sheet production). Most of the final products are destined for automotive parts and electrical appliances. Surface coatings : MMA is used for the production of surface coatings, both for industrial solvent based systems and increasingly, for water based acrylic dispersions for domestic and industrial use. MMA is used in water based acrylic dispersions for exterior masonry and wood coatings and semi gloss emulsions for interior decorative coatings. Gujarat State Fertiliser Company (GSFC) is the only producer of MMA in India. Installed capacity of 5,000 metric tonne per annum of MMA, along with plants for PMMA sheets (2,000 metric tonne per annum) and PMMA pellets (1,500-metric tonne per annum ). The consumption pattern of MMA in India differs from that of the rest of the world. The major use of the monomer in India is in the coatings industry, which accounts for about 70% of total consumption. Only 12% of total consumption is for making PMMA sheets and mouldings. Other applications include small uses of textile auxiliaries, sizing materials, modifier for PVC modifiers etc. With over 70% of Methyl Methacrylate (MMA) used in the production of Polymethyl Methacrylate (PMMA), the growing demand for PMMA against the backdrop of strong electronics production is benefiting growth in the MMA market. The growth in the market is also benefiting from emerging new applications of MMA, and its derivatives in a wide range of industries. Construction and automotive industries represent other major end-users of MMA in addition to electronics. Recovery in global GDP is poised to benefit consumption of MMA and its derivatives in architecture and construction, guided by the improving investments in residential and commercial construction projects. Stable automobile production trends worldwide are also expected to help boost global consumption of MMA. Polymethyl Methacrylate (PMMA) is expected to emerge as a substitute for existing medical polymers, against the backdrop of growing concerns over the health hazards caused by the use of PVC and polypropylene in addition to low biocompatibility issues. The presence of phthalate plasticizers in PVC is generating significant interest in PMMA in the healthcare industry. The growing use of plastics as a result of the increased focus on manufacturing light vehicles is helping spur demand for MMA/PMMA in automobile production. Stringent vehicle emission norms worldwide will additionally lend traction to growth in this sector. The automotive industry is one of the largest end user of MMA especially in molding and extrusion compounds. The use of MMA/PMMA in automotive plastics in addition to weight reduction also helps minimize vehicle vibration, cabin insulation, noise control, and enhance aesthetics. Specialty products such as optical-grade plexiglass, compact disk plexiglass and radiation shielding plexiglass are expected to offer lucrative growth potential. PMMA liquid membrane roofing system is a major advancement in the market, used in a wide range of applications including plaza decks, garden roofs, small roofs and irregular shaped roofs. The PMMA liquid membrane system is widely used in roofing crews owing to several benefits such as substrate compatibility, ease of use, speed and versatility
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Biodiesel - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Biodiesel (chemically known as fatty acid methyl ester) is an alternative fuel to conventional diesel (obtained from crude petroleum). When vegetable oil or animal fat is chemically reacted with an alcohol (methanol) and catalyst(caustic soda or caustic potash or sodium methoxide), biodiesel is produced along with glycerineas by product. This process is called transesterification. Biodiesel fuel has chemical properties that are similar to conventional diesel fuel and does not require any engine modifications or new equipment to enable its use as a blend stock or substitute for conventional diesel.Unlike conventional diesel fuel, biodiesel is renewable fuel and significantly reduces levels of harmful pollutants and global warming gases. The feedstock (vegetable oil and fats) include the following • Vegetable oils produced from oil seeds (like rape seeds / canola, soybean, sunflower, palm, jatropha, corn, cotton seed, etc) • Oil obtained from algae • Used cooking oil and grease (yellow, brown, etc) • Animal fat (beef tallow, poultry fat, pork fat, etc) • Fatty acids including palm fatty acid distillate • Wastes (e.g. waste oils, food processing wastes, etc), agricultural residues (straw, corn stover, etc), forestry residues and novel feedstocks, such as algae. Current R&D on biofuels is mainly focused on: • Developing cost-competitive advanced technologies to convert wastes into fuels; • Producing fuels with advanced properties that are compatible with existing engines and infrastructures (for air, long-distance freight, and shipping). However, biofuels production cannot be viewed in isolation. Biofuels are part of a growing global bioindustry, driven by the need to reduce reliance on fossil fuels, to decelerate climate change, increase fuel security and develop a greater range of bioproducts. With a growing global population, mean there is increasing local and global competition for land, feedstocks and water for food production (i.e. crops and livestock), non-food use (e.g. timber for construction), bioproducts (e.g. soaps, textiles, biopolymers, etc), and bioenergy (heat and power), as well as liquid biofuels. ? Selected producers of biodiesel in India • Universal Biofuels Pvt. Ltd • Southern Online Bio tech Ltd • Bannari Amman Sugars • My Ecoenergy • Emami Biotech Ltd To maximise the value of biomass resources, cascading production of bio products, liquid fuels and may be integrated in biorefineries. At the same time, biodiversity (species of plants and animals) need to be conserved, and forested areas must be protected as they act as important habitats and carbon sinks. In other words, the forests store large amounts of carbon in vegetation and soil. If areas are cleared for logging, grazing, crop production or constuction, the carbon is released into the atmosphere and habitat is lost. In order to ensure that communities, biodiversity and land are protected, a number of certification schemes and sustainability initiatives have been put in place for biofuels. These include initiatives by trade organisations, civil societies (NGOs), and government bodies. Further details are provided on the pages covering sustainability and certification of biofuels. In the coming decades, biofuels will be required for road, air, rail and shipping. An integrated biofuels strategy is required for meeting the competing needs of these different transport types at national and international level.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Melamine - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer which is fire resistant and heat tolerant. Melamine resin is a very versatile material with a highly stable structure. Uses for melamine include whiteboard, floor tiles, kitchenware, fire retardant fabrics, and commercial filters. Melamine can be easily molded while warm, but will set into a fixed form. This property makes it ideally suited to certain industrial applications. Melamine resin is manufactured by mixing melamine with formaldehyde, and sometimes urea, under heat and pressure. The substances begin to polymerize and are forced into a mold which will create the desired shape. Under pressure, melamine releases water, which could make the plastic unstable if it is not removed. The materials finish polymerizing and create a finished product, melamine resin. Melamine resin is known as a thermoset plastic, because the plastic is fixed after molding. If exposed to enough heat, melamine will decompose. For this reason, melamine dishware should not be exposed to high temperatures like those in the oven and microwave. The plastic is able to withstand higher temperatures than other plastics, however. Because it is a thermoset plastic, melamine resin is difficult to recycle. Melamine is stable, when stored under normal warehouse conditions. Although not particularly hygroscopic, powdered melamine must still be protected from wetting because, like most powders, it will form lump over extended storage period. The use of melamine as fertilizer for crops had been envisaged during the '50s and '60s because of its high nitrogen content (2/3). However melamine is much more expensive to produce than other common nitrogen fertilizers, such as urea. To be effective as a fertilizer, it is essential that the plant nutrients are released or made available in a manner that matches the needs of the growing crop. The nitrogen mineralization process for melamine is extremely slow, making this product both economically and scientifically impractical for use as a fertilizer. New project proposal under implementation In India Company: Gujarat State Fertilisers & Chemicals Ltd.,(GSFC) Capacity: 40000 metric tonne per annum Project cost: Around Rs.1000 crore Location: Vadodara,Gujarat The contract has been signed for supply of knowhow, basic engineering and proprietary equipment with M/s. Casale, Switzerland. Project is planned to be operational in 2nd quarter of 2017-18. To check adulteration in milk and milk products, the Food Safety and Standards Authority of India (FSSAI) has notified the maximum permissible level of the contaminant — melamine —in dairy products. According to the notification, FSSAI has imposed a permissible limit of 1 mg of melamine in every kg of powdered infant formula, 0.15 mg a kg in liquid infant formula and 2.5 mg a kg in other foods. This has been introduced in the Food Safety and Standards (Contaminants, Toxins & Residues) Amendments Regulations 2015. Global scenario Global production / demand (Period:2015):1.3 million metric tonne .China is the largest single participant in the melamine market, accounting for half of world consumption. Melamine capacity in China was 2.40 million metric tonne per annum in 2014, around 70% of the world total. China has around 29 melamine producers. Europe is the second largest melamine market, accounting for nearly 25% of world consumption. United States accounts for only about 4 to 5% of global melamine consumption. Melamine consumption structure consists of 50% laminates, followed by adhesives and resins for wood. The demand for melamine is likely to go up in tune with the performance of the laminate / plywood/ particle board industry, which in turn would increase in tune with the growth of the construction / furniture industry . During the next few years, global melamine consumption will grow at rate of about 4% per year, driven by China‘s growth and increases in other regions such as other Asian countries (not including Japan), Central and Eastern Europe, and the Middle East. Annual growth in Central and Eastern Europe is expected to be 3 to 4%, largely the result of increased production of laminates and wood adhesives. Consumption growth in Western Europe is forecast at more modest rate of 1 to 2% per year. Other Asian countries (excluding Japan) are expected to show good consumption growth at an average annual rate of 4%.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Blood Bags - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The system consists of a single or multiple bag connected with tubings, needle, needle cover, clamp etc. The Blood Bags are made of plastic-material, which are compatible with blood. The introduction of flexible PVC bags for the storage of blood and its components totally replaced the use of glass bottles because of its numerous advantages. Blood bags enable better separation of blood components in a more sterile manner and safer transfusion of components. This has led to increasingly wider use of blood component therapy than whole blood use, thus enabling more effective use of the scarce donor blood that is available. Blood Bags can successfully replace the use of glass bottles for collection storage, transportation and transfusion of blood and blood components since bottles require exhaustive cleaning, rinsing and autoclaving procedures and there are chances of breakage at any stage. Further, use of disposable bags eliminates the possibility of any contamination. Blood bags contain an anticoagulant solution and a red blood cell preservative solution, and are used in blood banks which both collect donor blood and separate blood components. Blood bags are made from imported, medical grade PVC granules & sheets in Class 10000 Clean room environments. Increase in the healthcare facilities will further act as a driver for the growth of medical devices sector in India. The blood bag market is expected to grow further in the coming years owing to continuous developments and rising demand for better blood collection technology. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 10000 Nos./DayPlant & machinery: Rs 176 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1106 Lakhs
Return: 25.24%Break even: 69.15%
Add to Inquiry Add to Inquiry Basket

Precipitated Silica from Rice Husk Ash - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy, producing energy through direct combustion & or by gasification. The rice husk contains about 75% organic volatile matter & the balance 25% of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85%–92% amorphous silica. Silica is one of the valuable inorganic chemical compounds. It can exist in gel, crystalline and amorphous forms. It is the most abundant material in the earth’s crust. Silica is the major constituent of rice husk ash. With such a large ash content & silica content in the ash it becomes economical to extract silica from the ash, which has wide market & also takes care of ash disposal. Precipitated Silica (also called particulate silica) is composed of aggregates of ultimate particles of colloidal size that have not become linked in massive gel network during the preparation process. Precipitated Silica soluble silicate solutions are of fine controlled particle size & porous in nature. Precipitated silica powders have a more open structure with higher volume than dried pulverized gels. Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics. Precipitated silica also finds its applications as anti caking agents in food industry & as thermal insulators. Precipitated silica is perhaps the best not black filler and reinforcing agent used in rubber industry especially for the production of silicon rubber. Precipitated silica market is fragmented and major portion of the global market share is constituted by regional players. Therefore, precipitated silica market has high price sensitivity. Moreover low capital investment has increased the threat of new entrants in the market mainly in the developing economies. There has been surge in investment by major players in the emerging economies. Thus, as an entrepreneur this project offers an exciting opportunity to you.
Plant capacity: Precipitated Silica:10 MT/Day • CaCO3 (by product):20.6 MT/DayPlant & machinery: Rs 864 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1255 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Distribution Transformer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. If mounted on a utility pole, they are called pole-mount transformers (or colloquially a pole pig). If the distribution lines are located underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers. Because of weight restrictions transformers for pole mounting are only built for primary voltages under 30 KV. The transformers is a device that transfers electricity or energy from one electric circuit to another without change of frequency and usually, but not always, with a change in voltage. In India the role of transformers assumes an added significance since in most of the states; electric supplies are not only erratic but are also characterized by wide variations in frequencies or voltages. These causes enormous damage to the electrical appliance like refrigerators, television and other industrial machinery engaged in the production of commodities. The transformer industry with the help of innovative methods, upgradation in technology etc., will have to manufacture transformers which offer maximum functional efficiency and are at the same time less hazardous or dangerous and economically viable. With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active. The industry, as a consequence, needs strategic alliances and tie-ups with technology suppliers to upgrade their supplies. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Accurate Transformers Ltd. • Andrew Yule & Co. Ltd. • Apex Electricals Ltd. • Crompton Greaves Ltd. • I M P Powers Ltd. • Indo Tech Transformers Ltd. • Kerala Electricals & Allied Engg. Co. Ltd. • Kirloskar Electric Co. Ltd. • Rams Transformers Ltd. • Shilchar Technologies Ltd. • Star Delta Transformers Ltd. • Tarapur Transformers Ltd. • Tesla Transformers Ltd. • Transformers & Rectifiers (India) Ltd. • Ujaas Energy Ltd. • Victory Electricals Ltd. • Victory Transformers & Switchgears Ltd.
Plant capacity: 2000 Nos./AnnumPlant & machinery: Rs 44 Lakhs
Working capital: -T.C.I: Cost of Project:eRs 391 Lakhs
Return: 28.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Seamless Pipes and Tubes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The seamless steel pipe industry is almost one century old. The prime reason for the development was provided by transportation sector. Petroleum sector consumes largest quantities of seamless tubes. The Indian seamless tube industry is about 55 Years old. Seamless pipe as the name suggests is a pipe without a seam or a weld-joint in contrast to Seam or Welded pipe. In a Seam or Welded pipe, the seam or the weld-joint is the weaker part of the pipe limiting the strength of the pipe to the strength of the weld-joint. Whereas the seamless pipe does not have any such joint and thus has uniform structure & strength all over the pipe body. Thus the seamless pipe can withstand higher pressure, higher temperature, higher mechanical stress & corrosive atmosphere and find wide applications in Oil & Gas, Refinery, Petrochemical, Chemical, Fertilizer, Power, Automotive, Bearing, Mechanical & Structural applications. The greatest advantage of seamless steel pipes is their increased ability to withstand pressure. The weakest point in a welded steel pipe is the welded seam. But because a seamless steel pipe has not been welded, it doesn’t have that seam, making it equally strong around the entire circumference of the pipe. Stainless steel pipes are used in petrochemicals, fertilizers, dairy industries power stations and nuclear plants. Other corrosion resistant applications as of food processing industry are also significant users. These pipes are used extensively by Nuclear Fuel Corporation. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bharat Heavy Electricals Ltd. • Gandhi Special Tubes Ltd. • I S M T Ltd. • Indian Seamless Enterprises Ltd. • Indian Seamless Metal Tubes (Kalyani Seamless Tubes) Ltd. • Indian Seamless Metal Tubes Ltd. • Indosin Pvt. Ltd. • Jindal Saw Ltd. • Mahalaxmi Seamless Ltd. • Maharashtra Seamless Ltd. • Oil Country Tubular Ltd. • P S L Ltd. • Patels Airflow Ltd. • R M G Alloy Steel Ltd. • Tubetec Seamless Ltd.
Plant capacity: 50 MT/DayPlant & machinery: Rs 636 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 2695 Lakhs
Return: 27.98%Break even: 39.79%
Add to Inquiry Add to Inquiry Basket

Micronutrients Fertilizer for Banana, Vegetables and Citrus - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nitrogen, phosphorus and potassium. The micronutrients are boron (B), copper (Cu), iron (Fe), manganese (Mn), molybdenum (Mo), zinc (Zn), and chloride (Cl). While chloride is a micronutrient, deficiencies rarely occur in nature, so discussions on supplying micronutrient fertilizers are confined to the other six micronutrients. Deficiencies of micronutrients have been increasing in some crops. Some reasons are higher crop yields which increase plant nutrient demands, use of high analyses NPK fertilizers containing lower quantities of micronutrient contaminants, and decreased use of farmyard manure on many agricultural soils. Micronutrient deficiencies have been verified in many soils through increased use of soil testing and plant analyses. A micronutrient fertilizer composition should fulfill the following criteria in order to secure the best effect and optimum plant growth: It should contain a number of the essential micronutrients, and preferably all of the essential micronutrients which are not readily available from the soil; It should be formulated and applied so as to ensure the best possible absorption of the micronutrients by the plant; It should be applied at the proper time in relation to the growth of the plant, i.e. especially at the beginning of the plant's growth cycle and when the soil temperature is at least about 5°C It has now been found that crop plants can easily and inexpensively be provided with a suitable balance of the essential micronutrients in a readily available form by means of a novel solid micronutrient fertilizer composition comprising the micronutrients in the form of metal salts together with at least one water-soluble nitrate. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Ajay Bio-Tech (India) Ltd. • Aries Agro Ltd. • Asian Fertilizers Ltd. • Chambal Fertilisers & Chemicals Ltd. • Gujarat State Fertilizers & Chemicals Ltd. • Indian Farmers Fertiliser Co-Op. Ltd. • Madras Fertilizers Ltd. • Mangalore Chemicals & Fertilizers Ltd. • Nava Bharath Fertilizers Ltd. • Navkisan Bio Plaantec Ltd. • Rashtriya Chemicals & Fertilizers Ltd. • Recon Agrotech Ltd. • Shivashakti Bio Technologies Ltd. • Tata Chemicals Ltd.
Plant capacity: Micronutrients Fertilizer for Banana:500 Kgs/Day •Micronutrients Fertilizer for Vegetables:500 Kgs/Day •Micronutrients Fertilizer for Citrus: 500 Kgs/DayPlant & machinery: Rs 7 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 30 Lakhs
Return: 30.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A sanitary napkin or a sanitary towel is an absorbent item used by a woman while she is menstruating or in any other situation where it is necessary to absorb a flow of blood. It also serves to protect clothing and furnishings. Not only must the sanitary napkin provide comfort and safety, but also enhance every woman's health and lifestyle. Thus, due to demand it is a good project for entrepreneurs to invest. Sanitary Napkins are exclusively used by adult girls & Ladies around the world during for maintaining physical aid & to avoid wetting or staining of the clothes. India’s sanitary napkin market has significant profit potential. The demand for such products is stable; purchases are recurring and not subject to normal business cycles. Historically, the price of feminine hygiene products have been relatively expensive, but that is changing as small and large businesses enter the market and make an accessible, lower-priced offering to a wider consumer base. Any entrepreneur venture into this field will be successful. ? Few Indian Major Players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Dhanalaxmi Roto Spinners Ltd. • Diapers India Ltd. • Godrej Consumer Products Ltd. • Gufic Biosciences Ltd. • Johnson & Johnson Ltd. • Kimberly Clark Lever Pvt. Ltd. • Mediklin Healthcare Ltd. • Syncom Healthcare Ltd. • Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: 30000 Packets/DayPlant & machinery: Rs 199 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 585 Lakhs
Return: 27.50%Break even: 40.44%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 21 of 28 | Total 276 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 21 27 28   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services


Contact Us

My Account


Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search

Search Project Reports & Profiles