Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 37 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 37 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Canvas Shoes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Footwear refers to garments worn on the feet, which originally serves to purpose of protection against adversities of the environment, usually regarding ground textures and temperature.The design of shoes has varied enormously through time and from culture to culture, with appearance originally being tied to function. High fashion shoes may be made of very expensive materials in complex construction and sell for thousands of dollars a pair. Other shoes are for very specific purposes, such as boots designed specifically for mountaineering or skiing. The shoes market, like most other product markets has diverse segmentations. First, by material of construction (leather, canvas and etc.,) second, by consumer variation (men’s, women’s) third, by usage pattern (formal shoes, casual and informal shoes)fourth, by types of shoes (military or police boots, formal dress, closed and pump shoes) and fifth, by price range (high-end over Rs. 1500 per pair going beyond Rs. 3000 per pair, medium priced shoes between Rs. 250 to Rs. 1500 per pair, and low-priced shoes below Rs. 250 per pair). The global footwear market is predominantly dictated by consumer trends. The surging demand for designer yet comfortable shoes among women and sportswear or athletic shoes among men have been bolstering opportunities for footwear sales. This increasing focus on sportswear will bolster opportunities for the footwear market. By the end of 2023, the market is expected to reach US$258.21 bn.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Lotto, • Adidas, • Puma • North Star • Liberty • Reebok • Nike • Bata • Action, • Phoenix • Casual • Woodland • Allen Cooper
Plant capacity: Canvas Shoes:1200,000 pairs/annum Leather Shoes:900,000 pairs/annumPlant & machinery: 607 lakhs
Working capital: -T.C.I: Cost of Project: 1006 lakhs
Return: 30.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Residential School - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

The importance of education was well recognized in India, ‘Swadeshepujyate raja, vidwansarvatrapujyate’ “A king is honoured only in his own country, but one who is learned is honoured throughout the world." The ultimate aim of education in ancient India was not knowledge, as preparation for life in this world or for life beyond, but for complete realization of self. A school is an institution designed to provide learningspacesandlearning environments for the teaching of studentsunder the direction of teachers. There has been massive expansion of school education in India in the last few decades. There are 15 lakh schools in the country as per DISE data for 2014-15. Government owns and manages nearly 75% of elementary, 43% of secondary and 40% of higher secondary schools, the remaining are privately owned and managed. There are 25.95 crore children enrolled in school education, including 19.77 crore at elementary level; 3.83 crore at secondary level; and 2.35 crore at higher secondary level (U-DISE 2014-15). Enrolment in private unaided elementary and secondary schools is around 33% each; and 39% at higher secondary level. Private unaided and aided schools account for nearly 42% of the enrolment in the school sector (grades I-XII). India has become the second largest market for e-learning after the US. The sector is currently pegged at US$ 2-3 billion, and is expected to touch US$ 40 billion by 2017.The K-12 system in India can be segmented by ownership, level of education and board of affiliation.25% of all K-12 schools in India are private schools, accounting for 40% share in student enrolment.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • The Valley School, Bangalore • Bishop Cotton School, Shimla • Delhi Public School • Rishi Valley School, Chittoor • Chinmaya International Residential School, Coimbatore • DhirubhaiAmbani International School, Mumbai • The Cathedral and John Connon School, Mumbai
Plant capacity: 5000 Nos of studentsPlant & machinery: Fixed Assets : 642 lakhs
Working capital: -T.C.I: Cost of Project : 4887 lakhs
Return: 0.35%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Mink Blankets

A blanket is a type of bedding, a large piece of woven cloth, intended to keep the user warm, especially while sleeping or lying down. A blanket traps the radiant heat from the user's body, and instead of dissipating into the air, it warms the user. It also protects against cold carried by convection. The Koreans and Chinese started the whole trend of soft acrylic blankets and even came up with the term, “mink blanket”. Even though we can find a mink blanket manufacturer in many, many different countries, most mink blankets are manufactured in Korea and China. As a result, Korean blankets and Chinese blankets probably make up 90% of the world’s mink blankets.Blankets are distinguished from bed sheets by their thickness and purpose. Blankets are thicker; even the thinnest blanket is thicker than the heaviest sheet. Blankets are generally used for warmth and comfort, while sheets are for hygiene, comfort and aesthetics. Largely concentrated in northern India, mink blankets units are present across Ludhiana, Amritsar, Panipat and Moradabad. As per data available, the total manufacturing capacity of the units in India is 50 lakh mink blankets per year, with the demand picking up during winter and festive season.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under Deepak Woollens Pvt. Ltd. Kadri Mills (Cbe) Ltd. OswalCottex Exports Ltd. ShitalFibres Ltd. SimondFibertech Ltd.
Plant capacity: Double Bed Blankets (3.50 Kgs Size): 444,900Nos/Annum Single Bed Blankets (2.50 Kgs Size) : 420,000Nos/Annum Baby Blankets (0.50 Kgs Size): 1,050,000Nos/AnnumPlant & machinery: Rs 1031 lakhs
Working capital: -T.C.I: Cost of Project: Rs 2048 lakhs
Return: 28.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Extrusion- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium is a versatile material integral to modern life. The metal is found in everything from soda cans to cell phones to window frames to airplanes. The aluminium industry can be categorized into two principal segments. The key segment is the production of primary aluminium by integrated producers engaged in the entire value chain from the mining of bauxite in an alumina refinery, and conversion of alumina into primary aluminium metal in an aluminium smelter. The extrusions segment is the preserve of the secondary producers with nearly 40 players, such as Jindal Aluminium, Century Aluminium, Sudal Industries, Bihar Extrusions and BhorukaAluminium, which account for over 80 per cent of the aggregate production capacity of tonnes. Aluminium extrusions are used for their strength, flexibility, durability and sustainability in various sectors such as construction, transportation, electrical, machinery and consumer durables. The increased usage in green initiatives is driving the growth of the Aluminium extrusion market. Technavio’s market research analyst estimates the global Aluminium extrusion market to witness a tremendous growth at a rate of around 7% during the forecast period.The growth of the automobile industry is anticipated to drive the growth of this market during the forecast period. Aluminium extrusion is replacing steel in automobiles and transport.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under AaryanExtrutech India Ltd. Alexcon Extrusions Ltd. AliconCastalloy Ltd. Aluminium Profiles Ltd. Anurang Engineering Co. Pvt. Ltd. Bharat Containers Pvt. Ltd. Decora Tubes Ltd. E V AAlu Panel Ltd.
Plant capacity: Aluminium Extruded Products: 1,350MT/AnnumPlant & machinery: Rs 276 lakhs
Working capital: -T.C.I: Cost of Project: Rs 657 lakhs
Return: 27.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Integrated Unit Cold Storage with Food Processing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Cold storage is a system for holding produce in an atmosphere that differs substantially from normal air in respect to CO2 and O2 levels. The gas mixture will constantly change due to metabolic activity of the respiring fruits and vegetables in the store and leakage of gases through doors and walls. The gases are therefore measured periodically and adjusted to the predetermined level by the introduction of fresh air or nitrogen or passing the store atmosphere through a chemical to remove CO2.There are different types of Cold storage depending mainly on the method or degree of control of the gases. Some researchers prefer to use the terms “static cold storage” and “flushed cold storage” to define the two most commonly used systems. The total value of the cold chain industry is estimated to be as high as USD 3 billion and growing at 20-25 per cent a year. The total value is expected to reach USD 8 billion by 2015 through increased investments, modernization of existing facilities, and establishment of new ventures via private and government partnerships. The Indian agricultural sector is witnessing a major shift from traditional farming to horticulture, meat and poultry and dairy products, all of which are perishables. The demand for fresh and processed fruits and vegetables is increasing as urban populations rise and consumption habits change. Due to this increase in demand, diversification and value addition are the key words in the Indian agriculture today.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bengal Bonded Warehouse Assn. • Container Corpn. Of India Ltd. • Desai Fruits & Vegetables Pvt. Ltd. • Duraflex Services & Construction Technologies Ltd. • H M G Industries Ltd. • Nav Bharat Refrigeration &Inds. Ltd.
Plant capacity: Mango Pulp (200 Kgs Size Drum Pack) : 10,000 Packs/Annum Mango Jelly (10 Kgs Size Poly Pack): 25,000 Packs/Annum Tomato Pulp (100 Kgs Size Drum Pack) : 30,000 Packs/Annum Cashew Nuts (50 Kgs Size Bag): 72,000 Packs/Annum Cashew Chikkes (Plant & machinery: Rs 500 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1749 lakhs
Return: 29.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Solar Panel Assembling & Solar Power Inverter on Grid, Off Grid WithSolar Pump Controller - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

A solar cell, sometimes called a photovoltaic cell, is a device that converts light energy into electrical energy.Solar panels generate free power from the sun by converting sunlight to electricity with no moving parts, zero emissions, and no maintenance. Multiple solar panels can be wired in parallel to increase current capacity (more power) and wired in series to increase voltage for 24, 48, or even higher voltage systems. India has a huge potential for solar power generation that can lead to a large-scale deployment of solar energy, if harnessed effectively. Indian Government is adopting constructive steps towards implementing large-scale solar power projects and is poised to position itself as one of the world’s major solar producer. India's power sector has a total installed capacity of approximately 1,46,753 Megawatt (MW) of which 54% is coal-based, 25% hydro, 8% is renewable’s and the balance is the gas and nuclear-based. Power shortages are estimated at about 11% of total energy and 15% of peak capacity requirements which is likely to increase in the coming years. Around 293 global and domestic companies have committed to generate 266 GW of solar, wind, mini-hydel and biomass-based power in India over the next 5–10 years. The initiative would entail an investment of about US$ 310–350 billion.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Admire Energy Solutions Pvt. Ltd. • Bharat Electronics Ltd. • Bharat Heavy Electricals Ltd. • Central Electronics Ltd. • Clique Developments Ltd. • Epic Energy Ltd. • J S W Green Energy Ltd. • Jaguar International Ltd. • K S K Surya Photovoltaic Venture Ltd. • MindaNexgen Tech Ltd.
Plant capacity: Poly Crystaline Solar PV Modules Cap10 Watt: 1,200,000 Nos/Annum Poly Crystaline Solar PV Module Cap. 20 Watt: 600,000 Nos/Annum Poly Crystaline Solar PV Module Cap. 50 Watt:240,000Nos/Annum Poly Crystaline Solar PV Module Cap. 100 Watt: 150,000Nos/AnnumPlant & machinery: Rs 1225 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1674 lakhs
Return: 26.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Cattle Breeding and Dairy Farm to Produce Milk

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms.But today, India derives nearly 33% of the gross Domestic population from agriculture and has 66% of economically active population, engaged in agriculture. The share of livestock product is estimated at 21% of total agriculture sector. Milk production alone involves more than 70 million producers, each raising one or two cows/buffaloes primarily for milk production.Milk is used as a food. It is used prepare curd, butter, ghee cream and ice cream etc. India is the world's largest producer of milk, and is the leading exporter of skimmed milk powder, yet she exports very few other milk product. There has been tremendous growth in dairy farming equipment that helps modern dairy farms to manage thousands of dairy cows and buffaloes. In the present situation of world market, the milk and dairy market landscape is a dynamic entity within the food industry new opportunities in emerging markets, increasing globalization, changes in consumer demand, nutritional policy and the regulatory environment are among top issues facing the industry.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Amrut Industries Ltd. • Anmol Dairy Ltd. • Britannia Industries Ltd. • G R B Dairy Foods Pvt. Ltd. • Haryana Milk Foods Ltd. • Indiana Dairy Specialities Ltd. • Industrial Progressive (India) Ltd. • Mahaan Foods Ltd. • Milkfood Ltd. • Nikumbh Dairy Products Ltd
Plant capacity: Cow Milk: 345,600 Kgs/Annum Buffalo Milk: 207,360Kgs/Annum Cattle Dung Manure: 1,080,000/AnnumPlant & machinery: Rs 46 lakhs
Working capital: -T.C.I: Cost of Project: Rs 282 lakhs
Return: 12.00%Break even: 74.00%
Add to Inquiry Add to Inquiry Basket

Repair & Refurbishment of Power Transformers

Transformer is a machine that transfers electrical energy from one electrical circuit to another without changing frequency by the principle of electromagnetic induction. Since its basic construction requires no moving parts so it is often called the static transformer and it is very rugged machine requiring the minimum amount of repair and maintenance. The term is used to include all transformers of large sizes (250kva and above) used in generating stations and substations for transforming the voltage at each end of a power transmission line. They may be single or three phase and voltage rating of220/11kv or in high voltage range.They are kept in operation all the 24 hours a day. In such transformer iron loss occur for all the time where copper loss occur only when they are loaded. Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in last year. During the period, consumption of electrical equipment is estimated to increase from over USD 28 bn now to USD 363 bn, growing at a CAGR of about 30%. The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. According to the Power Ministry, the power sector has tied up Rs. 2,240 bn worth of investments to build power plants with 70,000 MW capacity in the next three years.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Vijay Electricals • BHEL • EMCO • Indo Tech Transformers • Kirlosker Electric Co., • Kanohar Electricals
Plant capacity: Repairs of 25 MVA Power Transformers : 60 Nos/Annum Repairs of 50 MVA Power Transformers: 36 Nos/Annum Repairs of 100 MVA Power Transformers: 12 Nos/Annum Refurbishment of 25 MVA Power Transformers : 60 Nos/Annum Refurbishment of 50 MVA Power TransformersPlant & machinery: Rs 33 lakhs
Working capital: -T.C.I: Cost of Project: Rs 200 lakhs
Return: 26.00%Break even: 65.00%
Add to Inquiry Add to Inquiry Basket

Virgin Coconut Oil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Virgin coconut oil (VCO) is the purest form of coconut oil. Introduced onto the world market at the end of the 20th century, it is one of the highest value products derived from the fresh coconut. It is growing in popularity as functional food oil and the public awareness of it is increasing. It is the oil obtained from the fresh and mature kernel of coconut by mechanical or natural means, with or without the use of heat, without undergoing chemical refining, bleaching or deodorizing, and which does not lead to the alteration of the nature of the oil. It is expected that VCO will experience a dramatic growth in the market. The introduction of VCO has open up new research that basically reveals new things besides what has already been known on commercial coconut oil. Coconut oil is extensively used for food and industrial purposes. The oil is rich in medium chain fatty acids and exhibits good digestibility. The growing demand for virgin coconut oil (VCO) in the international market is expected to directly benefit coconut farmers in the State, with the Coconut Development Board (CDB) initiating steps to help local farmers set up their own large-scale VCO units. “The demand for VCO in the international market has increased considerably. In 2013-14, the export of VCO was Rs 5 crore, which increased to Rs 25 crore in 2014-15. This year, we estimate that VCO exports from India would touch Rs 75 crore.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Andhra Pradesh State Civil Supplies Corpn. Ltd. • ConfroAgros Ltd. • Diligent Industries Ltd. • K P L Oil Mills Pvt. Ltd. • Prima Industries Ltd. • Raj Oil Mills Ltd. • Sambandam Solvent Extraction Ltd.
Plant capacity: Virgin Coconut Oil (Packed in 1 Ltr Glass Bottle): 945,000/Annum Virgin Coconut Oil (Packed in Capsules) : 315,000/AnnumPlant & machinery: Rs 221 lakhs
Working capital: -T.C.I: Cost of Project: Rs 440 lakhs
Return: 27.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Moulded Items Plates and Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic glass and plates are manufactured by thermoforming technique. They are fast replacing conventional glass and plates. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass and cups business can never comes down. Instead of using porcelain or other material made plates these disposable plates, glass and cups are best alternate which comes in budget. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Glasses: 64,800 Kgs/Annum Thermocol Plates : 211,200 Kgs/AnnumPlant & machinery: Rs 30 lakhs
Working capital: -T.C.I: Cost of Project : Rs 109 lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 37 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 37 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top