Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 32 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 32 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Toothbrush - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plastic handle and nylon bristles attached to the head of the brush. Toothbrush occupies a prominent and very important place among the dentifice available today. Toothbrushes are getting more complex and sophisticated every year. New geometries, material combinations and additional functions are the only way to set off from the competition. Today’s consumer expects a dental care system which offers a multitude of preventive dental care measures such as interdental space cleaning, plaque and tartar removal. Due to the increasing awareness and importance of dental hygiene, the use of tooth paste was confined to the upper and upper middle classes of urban society, but with increasing awareness the use of Toothbrush has become well established in even rural house hold. Toothbrush being consumer product and its market being quite competitive and also acceptable. For keeping good health, care of teeth is one of the essential step. The particle of food that sticks to our teeth give birth to fouling smell and many dreadful diseases, which destroy the gums and results in tooth decay. A man, who do not have teeth in his mouth, only know as how important are these. A man having fouling smell coming out from his mouth cannot even get the close company of his companion, and if someone has got a dental diseases, one can blame only one's carelessness in the past. Fortunately people have become conscious of Toothbrushing. Any entrepreneur venture into this field will be successful Few Indian Major Players are as under • Ajay Home Products Ltd. • Anchor Health & Beauty Care Pvt. Ltd. • Andhra Pradesh State Civil Supplies Corpn. Ltd. • Aryan Brush & Estate Developers Ltd. • Camelot Investments Co. Pvt. Ltd. • Colgate-Palmolive (India) Ltd. • Contemporary Targett Ltd. • Dr. Fresh Assets Ltd. (1990) • Gillette India Ltd. • Sinhal Metal Inds. Ltd. • Trim Plastics Ltd. • W H Targett India Ltd. • Warren Pharmaceuticals Ltd.
Plant capacity: 15,000 Nos/DayPlant & machinery: Rs 178 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 316 Lakhs
Return: 26.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Caramel Food Colorant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Caramel colors are amorphous, brown to brownish materials resulting from the carefully controlled heat treatment of food grade carbohydrates in the presence of small amounts of food grade acids, alkalis or salts. Caramel or black jack is a dark brown colour prepared by heating sugar until it is decomposed and then adding boiling water to form a thick syrup. Caramel will impart a distinctive flavour of burnt sugar. Caramel is a well-known simple, brown means flavor and staple commercial material. It is an amorphous, dark-brown material that has been produced by the carefully controlled heat treatment of saccharine materials such as dextrose, invert sugar, lactose, malt syrup, molasses, sucrose, starch hydrolysates and fractions thereof, etc. The heavy-bodied, almost black syrup contains color, components that impart the amber shade found in carbonated beverages, pharmaceutical and flavoring extracts, candies, soups, bakery products, and numerous other foods. Caramelization, the act of breaking up the natural sugar molecules in food to create a different flavor compound, makes everything taste better. Caramelization is one of the most important types of browning processes in foods. It is the interaction between sugar and sugar. Fructose and glucose are reducing sugars so they give their electrons to other molecules developing compounds which give caramel colors and flavors, viz; Diacetyl gives a buttery flavor, Furan gives a nutty flavor, Acetaldehyde gives a rum or cherry components flavor. Few Indian Major Players are as under • Aarkay Food Products Ltd. • Dynemic Products Ltd. • International Flavours & Fragrances (India) Ltd. • Kancor Ingredients Ltd. • Neelikon Food Dyes & Chemicals Ltd. • Universal Starch-Chem Allied Ltd. • Vidhi Dyestuffs Mfg. Ltd.
Plant capacity: Caramel Food Colour:50 MT/DayPlant & machinery: Rs 405 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1223 Lakhs
Return: 25.82%Break even: 56.62%
Add to Inquiry Add to Inquiry Basket

Beer Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the third most popular drink overall after water and tea. Produced by the brewing and fermentation of starches, mainly derived from cereals — the most common of which being barley. Beer forms part of the culture of many nations, and has acquired various social traditions and associations. Beer is consumed in countries all over the world. Sales of beer are four times that of wine and in most societies, beer is the most popular alcoholic beverage. Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Formulations of beer manufacturing are done with the view of availability of the raw materials in that particular part of the World where the brewery is proposed to be established. In most of the parts of the world, barley is a universal source of beer extraction. But, beers are manufactured from Chamomile flowers and powdered gingers etc. as well. Separate formulations have been adopted for every major ingredient used in brewing & distillation of beer. Few Indian Major Players are as under • Appollo Distilleries & Breweries Pvt. Ltd. • Arlem Breweries Ltd. • Arthos Breweries Ltd. • Associated Breweries & Distilleries Ltd. • Aurangabad Breweries Ltd. • Blossom Industries Ltd. • Buckingham Distilleries & Breweries Ltd. • East Coast Breweries & Distilleries Ltd. • Foster'S India Ltd. • Hindustan Breweries & Bottling Ltd. • Kalyani Breweries Ltd. • Kool Breweries Ltd. • Lilasons Breweries Ltd. • Lilasons Industries Ltd. • Malabar Breweries Ltd. • Molson Coors India Pvt. Ltd. • Mysore Breweries Ltd. • Sabmiller India Ltd. • United Breweries Ltd. • Winsome Breweries Ltd.
Plant capacity: Beer (650 ml size Bottle):10,000 Litres/DayPlant & machinery: Rs 306 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1055 Lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

SOLAR PANEL- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Solar Panels are in general Silicon made Rectangular Shaped Glass Covered Products which Produce Electricity when exposed to the Sun. These Panels produce Direct Current (DC) Electricity which has to be converted by a Solar Invertr to Alternating Current (AC) Electricity to be used by Consumers. . Solar Panel produced Electricity usually costs between Rs 15-18 /KwH (much higher than the Rs 3-6/unit paid normally) which makes it uneconomical except in special cases like off grid applications. Replacing expensive Diesel powered Telecom Towers with Solar Panels is also an option. Sharply falling Solar Panel costs should make it competitive with your electricity in 2-3 years. In places like Italy, Solar Electricity is already competitive due to high prices of electricity. Conversion of light energy in electrical energy is based on a phenomenon called photovoltaic effect. Silicon is the most widely used semiconductor material for constructing photovoltaic cell. When semiconductor materials are exposed to light, the some of the photons of light ray are absorbed by the semiconductor crystal which causes significant number of free electrons in the crystal. This is the basic reason of producing electricity due to photovoltaic effect. The heart of the solar energy generation system is the Solar cell. It consists of three major elements, namely:- the semiconductor material, junction formed within the semiconductor, the contacts on the front and back of the cell that allow the current to flow to the external circuit. Uses and Application of photovoltaic are in agriculture, industry, telecommunication and public services. Solar power is attractive because it is abundant and offers a solution to fossil fuel emissions and global climate change. Earth receives solar energy at the rate of approximately 1,73,000 TW. In terms of all renewable energy, currently India is ranked fifth in the world with 15,691.4 MW grid-connected and 367.9 MW off-grid renewable energy based power capacity. India is among top 5 destinations worldwide for solar energy development as per Ernst & Young’s renewable energy attractiveness index. As a whole there is a good scope for entrepreneurs for investment.
Plant capacity: Solar PV Module (240 watt) : 350 Nos/day (25 MW)Plant & machinery: Rs 278 Lakhs
Working capital: -T.C.I: Cost of project: Rs 852 Lakhs
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

MEDIUM DENSITY FIBERBOARD - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry, auto industry. Medium density fiberboard (MDF) is a generic term for a panel primarily composed of lignocellulosic fibers combined with a synthetic resin or other suitable bonding system and bonded together under heat and pressure. Additives may be introduced during manufacturing to improve certain properties. The entire interfiber bond is formed by a synthetic resin or other suitable organic binder. MDF is generally cheaper than plywood. The surface of MDF is very smooth which makes it great surface for painting. MDF is very consistent throughout, so cut edges appear smooth and won’t have voids or splinters. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mn sqm of plywood and blockboards.MDF prices have been increase at an estimated average annual rate of 2.6% in 3 years to 2016. The global potential demand for panel board is estimated at 250 million m³ per year and the potential market for MDF alone is 100 million m³. As a whole it is a good project for entrepreneurs.
Plant capacity: Medium Density Fiberboard (MDF) : 50001 CBM/AnnumPlant & machinery: Rs 2034 Lakh
Working capital: -T.C.I: Cost of Project: Rs 3873 Lakh
Return: 28.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

PET RECYCLING - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Polyethylene terephthalate or PET (also known as PETE) is one of the most common types of plastic. Most single-serve plastic bottles, including those for water, soft drinks and juices, are made with PET. Designated by the recycling code “1”. PET-bottles have a negative impact on the environments because they are polluting soil, rivers, coastal areas, air when burned and consume a lot of landfill site space. So, it is very necessary to recycle of PET-bottles to saves 65% of the energy for primary PET-production. PET recycling is the process of reprocessing plastic that already has been used before and giving it some new reusable form. Recycled PET is converted into numerous products such as packaging applications (such as new bottles),sheet and film application, strapping, fiber applications. India produces around 500,000 tonnes of PET annually. The overall capacity of the industry is rated at about 650,000 tonnes per year. In the past, PET was subjected to high rates of duty and tax. Now the duty and taxes have been brought to the same levels as other competing materials like PVC, PP (polypropylene) and PE (polyethylene), ensuring a level playing field for PET. A market research study by GBI Research, sees Asia, including India driving the global demand for PET by 2020. India's main producer of PET containers, Pearl Polymers recorded over 6% growth in production and nearly 8.5% growth in sales of PET bottles and jars. Thus, due to demand it is a good project for entrepreneurs to invest.
Plant capacity: Recycled PET Granules : 12MT/dayPlant & machinery: Rs 189 Lakh
Working capital: -T.C.I: Cost of project: Rs 513 Lakh
Return: 26.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

HDPE / PP Woven Fabric From Tape Line using Circular Looms and Sacks Making with Lamination of BOPP/ BOPET/ LDPE and Printing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. Polypropylene, which is also known as PP for short name, is one kind of thermoplastic resin material that produced by the polymerization of propylene. Because of its non toxic, non-staining 100% reusable and durable it is widely used. The polypropylene woven fabric (PP Woven Fabric) provide strong, dependable and economical packaging option for diverse industries across the globe. These fabrics are light in weight and ideally suited for packaging corrugated or wooden boxes, cloth bales, machinery and many other finished goods for complete protection. They are used in making of bags,sacks ,Packing for Textiles, Upholstery, Carpets ,Making Tarpaulin Covers,Open Air Storage . Flexible Intermediate Bulk Containers (FIBC's): The FIBC is a large bag made of woven polypropylene (PP) fabric that is usually extrusion coated to provide additional barrier and leak-proofness. They are cheaper in cost and offer better packaging properties, high resistance towards moisture and insects. There are a little over 30 Indian manufacturers and the present output of the Indian FIBC industry is estimated to be about 125,000 MT per year valued at some Rs. 1,350 crores. The maximum growth potential is seen in the FIBC, woven sacks exports, leno bags & wrapping fabric. Thus, as an entrepreneur this project offers an exciting opportunity to you.
Plant capacity: HDPE/PP Woven Fabric: 7.2MT/day HDPE/PP Woven Bags for fertilizer: 102857 Nos/dayPlant & machinery: Rs 1507 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 2536 Lakhs
Return: 21.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Vacuum Fried Vegetable Chips (Sweet Potato, Beans and Beetroot)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

India is one of the largest producers of potato. Besides being used as a daily food item in various vegetable preparations, potato today increasingly finds use in the form of chips or wafers as snacks food. The potato chips and wafers are popular processed food items that give considerable value addition to potatoes. Mixed Vegetable Chips (Sweet Potato, Pumpkin, Carrot, Taro and Green Beans),mixed fruit chips and beet root chips are processed by a vacuum frying method, the latest technology using the carefully selected raw materials from the best growing regions. The basic chips are cooked and salted, and additional varieties are manufactured using various flavorings and ingredients including seasoning, herbs, spices, cheeses, and artificial additives. Chips are a predominant part of the snack food market in English speaking countries and numerous other Western and Asian nations. Vegetables chips and fruit chips are 100% natural, Low fat, high nutrient, no preservative. India's potato production has seen a phenomenal increase since the 1950s, mainly due to strong demand from the processing industry and remunerative returns. It is grown all over the country with Uttar Pradesh growing the maximum quantity. The overall size of the snack food market is estimated at Rs. 45 to Rs. 50 bn. The market is reported to be growing at 7 to 8 % annually. In India it is being produced not only on large scale by big firms, but also on cottage/home scale in semi-urban and rural areas. Owing to this, there is a number of companies from both the organized as well as unorganized sector who are already catering to the needs of tea stalls, restaurants, railway stations, tourist places etc. Still there is a huge demand to be met for these products in interior and remote places in different parts of the country. As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product.
Plant capacity: Sweet potato: 120 kg/day Beat root: 80 kg/day Beans chips: 266 kg/dayPlant & machinery: Rs 83 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 209 Lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Khaini, Zarda & Gutka - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Tobacco is an important commercial crop cultivated in an area of 0.4 million ha producing annually around 700 million kg of cured leaf out of which 260 M kg is Flue-Cured Virginia tobacco (cigarette type). India is the 3rd largest producer of tobacco in the world after China and Brazil. Flue-Cured Virginia (FCV), Bidi, Hookah and Chewing, Cigar filler, Cigar Wrapper, Cheroot, Burley, Oriental, HDBRG, Lanka etc., are the different types of tobacco grown in the country. India ranks 5th largest exporter of tobacco in the world after Brazil, USA, Malawi and Turkey. Gutka is the refined tobacco with catechu, chuna, flavouring agents and perfumery compounds etc. It is now-a-days a very common mouth freshener. Zarda is a mixture of tobacco, lime, spices, and occasionally, silver flakes is also added to pan and chewed. Khaini is not only the cured leaves of tobacco in granular form but it contains toxic, hovouring and soothing antiseptic ingredients which makes the man fresh and free from sullenness laziness. The tobacco industry is one of the most profitable industries in the world. All types of chewing tobacco is used as chewing material by the people which generates some sensation and makes the people fresh and recovering from tiresome. Due to its intoxicant constituent nicotine it serves the purpose of germicide for teeth and so people use it for saving their teeth from various dental diseases. India Tobacco market is expected to reach USD 35 billion by FY’ 2018. Chewing tobacco has been a tradition in India for centuries. Of the total amount of tobacco produced in the country, around 48% is in the form of chewing tobacco, 38% as bidis, and only 14% as cigarettes. Thus, bidis, snuff and chewing tobacco (such as gutka, khaini and zarda) form the bulk (86%) of India’s total tobacco production. In the rest of the world, production of cigarettes is 90% of total production of tobacco related products. The developing countries are expected to further increase their share in world tobacco production, according to the report. Any entrepreneur venture into this field will be successful.
Plant capacity: Khaini: 500 kg/day, Zarda: 500 kg/day, Gutka: 500kg/dayPlant & machinery: Rs 51 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 318 Lakhs
Return: 31.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Autoclaved Aerated Concrete Blocks (AAC Blocks)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Autoclaved Aerated Concrete (AAC) is a non-combustible, lime-based, cementitious building material that is expanding into new worldwide markets. . In our country aerated techniques have been developed for about 40 years, and its technique skills and equipments are becoming mature. The AAC has the features of light bulk density, good thermal insulation properties and sound-absorption, certain strength and process ability, and its raw materials is very rich, especially the reuse of fly ash enables the comprehensive utilization of industrial residue, curbs environmental pollution, no destroy on farmland, create good social and economic benefits. AAC is an ideal alternative of the traditional clay brick wall materials. This is a light- weight building material produced by autoclaving a set mix of fine siliceous materials such as ground sand or fly ash and a binder like Portland cement or lime. AAC products are equally suitable for residential construction, multistory buildings, commercial, and industrial construction. The autoclaved aerated concrete sector of the construction industry is now in the phase of a tremendous growth cycle. AAC Reduces Additional Material Use and Minimizes Waste and Pollution. The main benefits of autoclaved aerated concrete over other cladding materials are its good strength-to-weight ratio, its mobility and, because it is a non-combustible material, its fire performance. There will be phenomenal growth in autoclaved aerated industry in the near future. It is estimated that by 2025 about 66 per cent of the world population will live in urban areas on 7 per cent of the land, which means that urbanization will be on a small portion of land. This will need taller buildings and use of high strength concrete.
Plant capacity: AAC Blocks: 500 Cu.Mtr./dayPlant & machinery: Rs 601 Lakhs
Working capital: -T.C.I: Cost of project: Rs 1415 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 32 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 32 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top