Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 30 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 30 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Blood Bags - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The system consists of a single or multiple bag connected with tubings, needle, needle cover, clamp etc. The Blood Bags are made of plastic-material, which are compatible with blood. The introduction of flexible PVC bags for the storage of blood and its components totally replaced the use of glass bottles because of its numerous advantages. Blood bags enable better separation of blood components in a more sterile manner and safer transfusion of components. This has led to increasingly wider use of blood component therapy than whole blood use, thus enabling more effective use of the scarce donor blood that is available. Blood Bags can successfully replace the use of glass bottles for collection storage, transportation and transfusion of blood and blood components since bottles require exhaustive cleaning, rinsing and autoclaving procedures and there are chances of breakage at any stage. Further, use of disposable bags eliminates the possibility of any contamination. Blood bags contain an anticoagulant solution and a red blood cell preservative solution, and are used in blood banks which both collect donor blood and separate blood components. Blood bags are made from imported, medical grade PVC granules & sheets in Class 10000 Clean room environments. Increase in the healthcare facilities will further act as a driver for the growth of medical devices sector in India. The blood bag market is expected to grow further in the coming years owing to continuous developments and rising demand for better blood collection technology. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 10000 Nos./DayPlant & machinery: Rs 176 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1106 Lakhs
Return: 25.24%Break even: 69.15%
Add to Inquiry Add to Inquiry Basket

Precipitated Silica from Rice Husk Ash - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy, producing energy through direct combustion & or by gasification. The rice husk contains about 75% organic volatile matter & the balance 25% of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85%–92% amorphous silica. Silica is one of the valuable inorganic chemical compounds. It can exist in gel, crystalline and amorphous forms. It is the most abundant material in the earth’s crust. Silica is the major constituent of rice husk ash. With such a large ash content & silica content in the ash it becomes economical to extract silica from the ash, which has wide market & also takes care of ash disposal. Precipitated Silica (also called particulate silica) is composed of aggregates of ultimate particles of colloidal size that have not become linked in massive gel network during the preparation process. Precipitated Silica soluble silicate solutions are of fine controlled particle size & porous in nature. Precipitated silica powders have a more open structure with higher volume than dried pulverized gels. Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics. Precipitated silica also finds its applications as anti caking agents in food industry & as thermal insulators. Precipitated silica is perhaps the best not black filler and reinforcing agent used in rubber industry especially for the production of silicon rubber. Precipitated silica market is fragmented and major portion of the global market share is constituted by regional players. Therefore, precipitated silica market has high price sensitivity. Moreover low capital investment has increased the threat of new entrants in the market mainly in the developing economies. There has been surge in investment by major players in the emerging economies. Thus, as an entrepreneur this project offers an exciting opportunity to you.
Plant capacity: Precipitated Silica:10 MT/Day • CaCO3 (by product):20.6 MT/DayPlant & machinery: Rs 864 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1255 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Distribution Transformer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. If mounted on a utility pole, they are called pole-mount transformers (or colloquially a pole pig). If the distribution lines are located underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers. Because of weight restrictions transformers for pole mounting are only built for primary voltages under 30 KV. The transformers is a device that transfers electricity or energy from one electric circuit to another without change of frequency and usually, but not always, with a change in voltage. In India the role of transformers assumes an added significance since in most of the states; electric supplies are not only erratic but are also characterized by wide variations in frequencies or voltages. These causes enormous damage to the electrical appliance like refrigerators, television and other industrial machinery engaged in the production of commodities. The transformer industry with the help of innovative methods, upgradation in technology etc., will have to manufacture transformers which offer maximum functional efficiency and are at the same time less hazardous or dangerous and economically viable. With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active. The industry, as a consequence, needs strategic alliances and tie-ups with technology suppliers to upgrade their supplies. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Accurate Transformers Ltd. • Andrew Yule & Co. Ltd. • Apex Electricals Ltd. • Crompton Greaves Ltd. • I M P Powers Ltd. • Indo Tech Transformers Ltd. • Kerala Electricals & Allied Engg. Co. Ltd. • Kirloskar Electric Co. Ltd. • Rams Transformers Ltd. • Shilchar Technologies Ltd. • Star Delta Transformers Ltd. • Tarapur Transformers Ltd. • Tesla Transformers Ltd. • Transformers & Rectifiers (India) Ltd. • Ujaas Energy Ltd. • Victory Electricals Ltd. • Victory Transformers & Switchgears Ltd.
Plant capacity: 2000 Nos./AnnumPlant & machinery: Rs 44 Lakhs
Working capital: -T.C.I: Cost of Project:eRs 391 Lakhs
Return: 28.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Seamless Pipes and Tubes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The seamless steel pipe industry is almost one century old. The prime reason for the development was provided by transportation sector. Petroleum sector consumes largest quantities of seamless tubes. The Indian seamless tube industry is about 55 Years old. Seamless pipe as the name suggests is a pipe without a seam or a weld-joint in contrast to Seam or Welded pipe. In a Seam or Welded pipe, the seam or the weld-joint is the weaker part of the pipe limiting the strength of the pipe to the strength of the weld-joint. Whereas the seamless pipe does not have any such joint and thus has uniform structure & strength all over the pipe body. Thus the seamless pipe can withstand higher pressure, higher temperature, higher mechanical stress & corrosive atmosphere and find wide applications in Oil & Gas, Refinery, Petrochemical, Chemical, Fertilizer, Power, Automotive, Bearing, Mechanical & Structural applications. The greatest advantage of seamless steel pipes is their increased ability to withstand pressure. The weakest point in a welded steel pipe is the welded seam. But because a seamless steel pipe has not been welded, it doesn’t have that seam, making it equally strong around the entire circumference of the pipe. Stainless steel pipes are used in petrochemicals, fertilizers, dairy industries power stations and nuclear plants. Other corrosion resistant applications as of food processing industry are also significant users. These pipes are used extensively by Nuclear Fuel Corporation. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bharat Heavy Electricals Ltd. • Gandhi Special Tubes Ltd. • I S M T Ltd. • Indian Seamless Enterprises Ltd. • Indian Seamless Metal Tubes (Kalyani Seamless Tubes) Ltd. • Indian Seamless Metal Tubes Ltd. • Indosin Pvt. Ltd. • Jindal Saw Ltd. • Mahalaxmi Seamless Ltd. • Maharashtra Seamless Ltd. • Oil Country Tubular Ltd. • P S L Ltd. • Patels Airflow Ltd. • R M G Alloy Steel Ltd. • Tubetec Seamless Ltd.
Plant capacity: 50 MT/DayPlant & machinery: Rs 636 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 2695 Lakhs
Return: 27.98%Break even: 39.79%
Add to Inquiry Add to Inquiry Basket

Micronutrients Fertilizer for Banana, Vegetables and Citrus - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nitrogen, phosphorus and potassium. The micronutrients are boron (B), copper (Cu), iron (Fe), manganese (Mn), molybdenum (Mo), zinc (Zn), and chloride (Cl). While chloride is a micronutrient, deficiencies rarely occur in nature, so discussions on supplying micronutrient fertilizers are confined to the other six micronutrients. Deficiencies of micronutrients have been increasing in some crops. Some reasons are higher crop yields which increase plant nutrient demands, use of high analyses NPK fertilizers containing lower quantities of micronutrient contaminants, and decreased use of farmyard manure on many agricultural soils. Micronutrient deficiencies have been verified in many soils through increased use of soil testing and plant analyses. A micronutrient fertilizer composition should fulfill the following criteria in order to secure the best effect and optimum plant growth: It should contain a number of the essential micronutrients, and preferably all of the essential micronutrients which are not readily available from the soil; It should be formulated and applied so as to ensure the best possible absorption of the micronutrients by the plant; It should be applied at the proper time in relation to the growth of the plant, i.e. especially at the beginning of the plant's growth cycle and when the soil temperature is at least about 5°C It has now been found that crop plants can easily and inexpensively be provided with a suitable balance of the essential micronutrients in a readily available form by means of a novel solid micronutrient fertilizer composition comprising the micronutrients in the form of metal salts together with at least one water-soluble nitrate. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Ajay Bio-Tech (India) Ltd. • Aries Agro Ltd. • Asian Fertilizers Ltd. • Chambal Fertilisers & Chemicals Ltd. • Gujarat State Fertilizers & Chemicals Ltd. • Indian Farmers Fertiliser Co-Op. Ltd. • Madras Fertilizers Ltd. • Mangalore Chemicals & Fertilizers Ltd. • Nava Bharath Fertilizers Ltd. • Navkisan Bio Plaantec Ltd. • Rashtriya Chemicals & Fertilizers Ltd. • Recon Agrotech Ltd. • Shivashakti Bio Technologies Ltd. • Tata Chemicals Ltd.
Plant capacity: Micronutrients Fertilizer for Banana:500 Kgs/Day •Micronutrients Fertilizer for Vegetables:500 Kgs/Day •Micronutrients Fertilizer for Citrus: 500 Kgs/DayPlant & machinery: Rs 7 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 30 Lakhs
Return: 30.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A sanitary napkin or a sanitary towel is an absorbent item used by a woman while she is menstruating or in any other situation where it is necessary to absorb a flow of blood. It also serves to protect clothing and furnishings. Not only must the sanitary napkin provide comfort and safety, but also enhance every woman's health and lifestyle. Thus, due to demand it is a good project for entrepreneurs to invest. Sanitary Napkins are exclusively used by adult girls & Ladies around the world during for maintaining physical aid & to avoid wetting or staining of the clothes. India’s sanitary napkin market has significant profit potential. The demand for such products is stable; purchases are recurring and not subject to normal business cycles. Historically, the price of feminine hygiene products have been relatively expensive, but that is changing as small and large businesses enter the market and make an accessible, lower-priced offering to a wider consumer base. Any entrepreneur venture into this field will be successful. ? Few Indian Major Players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Dhanalaxmi Roto Spinners Ltd. • Diapers India Ltd. • Godrej Consumer Products Ltd. • Gufic Biosciences Ltd. • Johnson & Johnson Ltd. • Kimberly Clark Lever Pvt. Ltd. • Mediklin Healthcare Ltd. • Syncom Healthcare Ltd. • Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: 30000 Packets/DayPlant & machinery: Rs 199 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 585 Lakhs
Return: 27.50%Break even: 40.44%
Add to Inquiry Add to Inquiry Basket

Extraction of Salt from Sea Water - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Salt is an essential ingredient for the survival of all living creatures, including humans. Salt is needed in regulating the fluid balance or water content of body. Salt cravings may occur as a result of trace mineral deficiencies or due to the deficiency of sodium chloride itself. Salt is important for life, but its overconsumption can cause health problems, such as high blood pressure, in those individuals who are genetically predisposed to hypertension. Main source of salt is rocks and sea. Maximum consumption of salt is in its natural form after being produced from sea or directly from rock. Salt, also known as sodium chloride, comprises the elements sodium and chlorine. Sodium is a silver-colored metal that is so unstable that it reacts violently in the presence of water, and chlorine is a greenish-colored gas that is dangerous and may be lethal. Yet the combination of these two elements forms sodium chloride that is a white-colored compound essential to life itself. Virtually every person in the world has some direct or indirect contact with salt daily. People routinely add salt to their food as a flavor enhancer or apply rock salt to walkways to remove ice in the winter. Salt is used as feedstock for chlorine and caustic soda manufacture. These two inorganic chemicals are used to make many consumer-related end-use products, such as polyvinyl chloride (PVC), a plastic made from chlorine and paper-pulping chemicals manufactured from sodium hydroxide (caustic soda). Iodizing salt for human consumption is a modern trend. Iodine is used in the body for formation of thyroxin an essential hormone. Salt is used as a medium in supply iodine to the body. Iodization of common salts has been recognized all over the world to meet the deficiency of iodine to eradicate goiter. Few Indian Major Players are as under • Aditya Birla Chemicals (India) Ltd. • Ankur Chemfood Ltd. • Bharat Salt & Chemical Inds. (Mundra-Kutch) Ltd. • Chowgule & Co. (Salt) Ltd. • Consumer Protection & Guidance Co. Ltd. • D C W Ltd. • G H C L Ltd. • Gujarat State Civil Supplies Corpn. Ltd. • Himachal Pradesh State Civil Supplies Corpn. Ltd. • Hindustan Salts Ltd. • Indian Products Ltd. • Kutch Salt & Allied Inds. Ltd. • N. E. Regional Agri. Mktg. Corp. Ltd. • Parakh Foods Ltd. • Positive Biosciences Ltd. • Priyadarshini Salt Works Pvt. Ltd. • Saboo Sodium Chloro Ltd. • Sahayamatha Salt Refinery Ltd. • Sambhar Salts Ltd. • Solaris Chemtech Inds. Ltd. • Sree Maruthi Marine Inds. Ltd. • Super Salts Pvt. Ltd. • Tamil Nadu Salt Corpn. Ltd. • Tata Chemicals Ltd. • Tuticorin Salt & Marine Chemicals Ltd.
Plant capacity: Iodized Salt: 100 MT/ day •Industrial Salt: 100 MT/ dayPlant & machinery: Rs 1156 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 2776 Lakhs
Return: 29.00%Break even: 40.75%
Add to Inquiry Add to Inquiry Basket

HDPE/PP Bags - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Woven fabric is a textile formed by weaving. It is produced on a loom, and made of many threads woven on a warp and a weft. Woven polypropylene/HDPE bags or simply woven PP/HDPE bags are considered to be the toughest packaging bags, widely used to pack materials for grain, milling and sugar industry. HDPE/PP oriented strips are becoming increasingly popular in India & have caught the eye of many end users for their requirement of packing materials. They have become popular on account of their inertness towards chemical, moisture & excellent resistance towards rotting & fungus attack. They are non toxic. Lighter in weight & have more advantages than conventional bags. PP/HDPE woven sacks laminated with LDPE/PP liner have wider applications. HDPE woven sacks are much stronger & can withstand much higher impact loads because of HDPE strips elongation at break is about 15-25% as compared to 30% of Jute. These sacks are much cleaner & resist fungal attack. Jute prices are very unstable in the market since Jute is an agriculture product. These sacks have many advantages over other conventional sacks materials & are quite competitive in price. HDPE/PP Woven bags ideally suitable for Building Materials, Cement, fertilizers, Urea, Potash, plastic, polymers, plastic pellets, etc. Food grains: Rice, Wheat, Pulses, Tea, Coffee, Beans, Peanuts, Sand, Sugar. Chemicals: Pigments, Dyestuffts, oxides, barytes, alumina, hydrates, ores, gypsum, feldspar, mica, Lime, limestone, Woven Packaging Fabrics, Woven bags and fabrics are often used as an industrial packaging material. The packaging bags and fabrics are available mostly in HDPE (High Density Polythene) and PP (Polypropylene). Depending on end use these are either laminated, or supplied without lamination. These materials are valuable for applications in many different industries. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Abdos Polymers Ltd. • Ashok Polymers Ltd. • Dalmia Laminators Ltd. • Emmbi Industries Ltd. • Ganpati Plastfab Ltd. • Gujarat Raffia Inds. Ltd. • Indra Industries Ltd. • Jajodia Industries Ltd. • Karnavati Alfa Intl. Ltd. • Karur K C P Packkagings Ltd. • Magnum Polymers (India) Ltd. • Neo Corp Intl. Ltd. • Polyspin Exports Ltd. • Primo Pick N Pack Pvt. Ltd. • Salguti Industries Ltd. • Shankar Packagings Ltd. • Shiv International Ltd. • Smitabh Intercon Ltd. • Stanpacks (India) Ltd. • Timespac India Pvt. Ltd.
Plant capacity: 300000 Nos/DayPlant & machinery: Rs 396 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1231 Lakhs
Return: 29.76%Break even: 57.26%
Add to Inquiry Add to Inquiry Basket

Corrugated Cartons

Packing, in a way represents the extent of industrialization of a country. Packaging has been assuming importance in the context of growth of industries in general and consumer industries in particular. Paper is one of the most important materials that enter packaging. Paper is extensively used for making boxes, bags, sealing tapes, drums and tubes and as cushioning materials. The materials now available for packaging are paper and paper products, metal containers and foils, glass, plastics-rigid and flexible, cellulose films, textiles including jute, woven plastics and wood. Among the packaging materials, paper and paper based products continue to occupy a predominant place. Paper based materials used for packaging include bleached and unbleached Kraft, corrugated and solid fiber boards, and a large variety of converted items like wax coated, plastic coated, bitumen coated etc. Corrugated and solid fiberboard boxes have replaced the conventional wooden boxes as transport containers because of their lightweight and satisfactory strength. Corrugated boxes form an integral part of the packaging industry. These are found everywhere helping people shift both domestic as well as industrial items safely from one place to the other. With increasing levels of organized retail and marketing of consumer goods in India, the packaging industry is shifting towards higher end packaging materials. As a consequence, demand of high end coated paper boards is experiencing significant growth despite constraint of having single supplier in the country. ? Few Indian Major Players are as under • Ashiana Agro Inds. Ltd. • Associated Pulp & Paper Mills Ltd. • Brown Kraft Inds. Ltd. • Chadha Papers Ltd. • Diamond Products Prtg. & Processing Ltd. • Haldyn Corporation Ltd. • India Packaging Products Pvt. Ltd. • K C L Ltd. • Mira Textiles & Inds. (India) Ltd. • Mirah Dekor Pvt. Ltd. • Nec Packaging Ltd. • Perfectpac Ltd. • Superior Industrial Enterprises Ltd. • Universal Enterprises Ltd. • Varun Beverages Ltd. • Wadpack Pvt. Ltd.
Plant capacity: 10000 Nos/DayPlant & machinery: Rs 46 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 171 Lakhs
Return: 25.38%Break even: 60.35%
Add to Inquiry Add to Inquiry Basket

Health Drink (Cocoa Beverages in Granules Form) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

The health food drink market in India is approx. 300,000 MT per annum and is growing at the rate of around 15% per annum. The health food drinks are popularly used as a milk additive for better nutrition and taste. Health Food Drinks are added to the diet to boost overall health and energy; to provide immune system support and reduce the risks of illness and age-related conditions; to improve performance in athletic and mental activities; and to support the healing process during illness. However, most of these products are treated as food and not regulated as drugs are. Most of the Health Food Drinks in India are Malted Food Drinks. The Malted Food Drink is a sub category of the Health Food Drink in India. These drinks are purely natural with no side-effects and are good for human health. These drinks are well suited for kids, youngsters, adults, women (both pregnant and non-pregnant) and practically everyone. ? Horlicks came to India with the British Army; the end of World War I saw Indian soldiers of British Indian Army bringing it back with them as a dietary supplement. Punjab, Bengal and Madras Presidencies became early adopters of Horlicks and many well-to-do Indians took to drinking Horlicks as a family drink in early 1940s and 1950s. It became a sort of status symbol in upper middle class Indians and rich classes. The first flavour available in India, as in Britain, was malt. India, where it has traditionally been marketed as The Great Family Nourisher, is the largest market for Horlicks. The Indian formulation for Horlicks is slightly different than in most other countries, as there it is manufactured from buffalo milk rather than cow’s milk due to cultural concerns. In 2003, the brand underwent a revamp which led to the introduction of new flavours such as vanilla, toffee, chocolate, honey, and elaichi (cardamom). The current line-up of flavours includes original (malt), chocolate and elaichi. with the latest offering Horlicks Kesar Badaam added recently to the portfolio, providing a more specialized taste offering to the consumers. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Abbott Healthcare Pvt. Ltd. • Glaxosmithkline Consumer Healthcare Ltd. • Gujarat Co-Op. Milk Mktg. Fedn. Ltd. • Heinz India Pvt. Ltd. • Mondelez India Foods Pvt. Ltd. • Wockhardt Ltd. • Zydus Wellness Ltd.
Plant capacity: 30 MT/DayPlant & machinery: Rs 284 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1024 Lakhs
Return: 28.54%Break even: 55.85%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 30 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 30 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top