Float Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics
|Glass is one of man's most valuable and versatile materials. About 700 different compositions are in thousands use. These are fabricated into tens of thousands of different articles that have combinations of properties for about a thousand essentially different uses. Glass is formed from those elements such as silicon, boron, phosphorous and arsenic that can be converted into glass when combined with oxygen, sulphur, tellurium or selenium. A common glass contains about 70% SiO2. Sodium carbonate or soda ash decomposes, to sodium oxides as the batch of raw material melts. Consequently it acts as a flux. The carbon dioxide given off helps to stir the batch, and the oxide lowers the melting point (and the viscosity of the formed glass at any given temperature). Flat glass industry has developed world wide since the float glass process started in the 1980s. It is well known fact all over the world that the best quality glass can be produced with the help of the float glass technology. There are no waves and distortion in the sheet glass manufacturing with the help of float glass technology, is the final product is free of all defects. The float glass sector is having a rapid development on production process, product yield, variety and above all quality. Currently float glass production has accounted for more than 70% of total output. However, at the same time of bolting the vertical upwards process, and developing float glass, the market contradictions of the demand for thin glass have also emerged. The industrial structure of the glass sector in India has been optimized continuously. Diversified new technologies and new products have been developed and glass-processing technology is developing rapidly. In the past, flat glass was used as a transparent material only, but now a days, its multiple functions have been opened out, such as light control, thermal regulation, energy saving, noise control, decoration and environment beautification. The total float glass manufactured in India is approximately 1million tons per annum and almost 77 per cent are consumed domestically. The demand for the float glass, barring the economic slowdown in 2008-09, is increased at a CAGR of 15-20 per cent during the last 2-3 years against the global growth rate around 4 per cent. The total size of the net float glass industry is around 4000 tonnes a day and around 67 percent constitutes clear float glass. Currently, the float glass industry is growing at a healthy rate of 18 percent buoyed by demand for both architectural and automotive glass. There is a huge market for float glass in the country resulting from the growing realty and auto sectors. Also, the extremely low per capita consumption of only 0.7 kg in India as compared to average of 8-10 kg in other developing economies is a tremendous potential for growth of this industry. The glass industry is rapidly transforming. There is a very good scope for new entrepreneurs to venture into this field.|
|Plant capacity: 43200 MT/Annum||Plant & machinery: 720 Lakhs|
|Working capital: -||T.C.I: Cost of Project : 10300 Lakhs|
|Return: 43.00%||Break even: 41.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.
Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.
NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.
Products & Services