Blog

Industrial Polymers, Additives, Colourants and Fillers (Stabilizers, Pigments, Olefin Copolymers, Polyacrylamide, Polysulfone, Polymerization, Allyl Resins (DAP/DAIP), Fluoropolymers, Poly (Vinylidene, Resin Forms, Polyamide-Imide (PAI))

Thursday, June 1, 2017

facebook twitter Bookmark and Share

The Indian plastic and polymer industry has taken great strides. In the last few decades, the industry has grown to the status of a leading sector in the country with a sizable base. The material is gaining notable importance in different spheres of activity and the per capita consumption is increasing at a fast pace. Numerous plastics and fibers are produced from synthetic polymers; containers from propylene, coating materials from PVC, packaging film from polyethylene, experimental apparatus from Teflon, stockings from nylon fiber, there are too many to mention them all. The reason why plastics are popular is that they may offer such advantages as transparency, self-lubrication, light weight, flexibility, economy in fabricating and decorating. Properties of plastics can be modified through the use of fillers, reinforcing agents and chemical additives. Silicones are by far the most important industrial polymers and are based on silicon, an element abundantly available on our planet. Polymers are classified in three broad groups; addition polymers, condensation polymers and special polymers. It is well known that the major consumption of additives is in PVC compounds. Approximately 80% of additives are being used in PVC; however the left over 20% is consumed in compounding of other thermoplastics. Plastic master batches and fillers have their own importance in plastic processing industries. Colorants are the materials that give colour and opacity to plastics are chemically characterized as either pigments or dyes. Pigments are finely pulverized natural or synthetic particles which may be of inorganic or organic origin and insoluble in the matrix in which they are dispersed. Permanent red 2B is a mono AZO pigment that is widely used in thermoplastics because it is inexpensive and has high tinting strength and good bleed resistance. Fillers are commonly employed in opaque PVC compounds to reduce cost and to improve electrical insulation properties, to improve deformation resistance of cables, to increase the hardness of a flooring compound and to reduce tackiness of highly plasticized compounds. Various calcium carbonate are used for general purpose work, china clay is commonly employed for electrical insulation, and asbestos for flooring applications. Also employed occasionally are the silicas and silicates, talc, light magnesium carbonate and barites (barium sulfate). Polymer Energy system is an award winning, innovative, proprietary process to convert waste plastics into renewable energy. Polymers are the most rapidly growing sector of the materials industry. No wonder polymers are found in everything from compact discs to high tech aerospace applications. On the basis of value added, Indian share of plastic products industry is about 0.5% of national GDP.

Market Outlook

The total production of polymers was 6533.157 thousand metric tonne in the year 2014-15. In percentage terms, contribution of different varieties of polymers was: Linear Low Density Polyethylene (LLDPE) 13.9%, High Density Polyethylene (HDPE) 17.70%, Low Density Polyethylene (LDPE) 2.80%, Polystyrene (PS) 4.30%, Polypropylene (PP) 39.70%, Poly Vinyl Chloride (PVC) 20.40%, and Expandable Polystyrene (EX-PS) 1.20%.

Global Polyurethane (PU) Market size was projected at $51.6 billion for 2015 and is anticipated to generate revenue greater than $78 billion by end of forecast timeline.

The market size for plastic additives was USD 38.31 Billion in 2015 and is projected to reach USD 50.86 Billion by 2021, registering a CAGR of 4.9% between 2016 and 2021.

Global Plastic Additives Market is expected to grow significantly at a CAGR of 4.5% from 2015 to 2022.

The global polymer fillers market is expected to reach $ 54.8 billion by 2021, growing at a CAGR of 3.28 percent between 2016 and 2021.

See more

https://goo.gl/ptfd4d

https://goo.gl/07d9lm

https://goo.gl/BY1XbB

Contact us:

Niir Project Consultancy Services

106-E, Kamla Nagar, Opp. Spark Mall,

New Delhi-110007, India.

Email: [email protected]  , [email protected]

Tel: +91-11-23843955, 23845654, 23845886, 8800733955

Mobile: +91-9811043595

Website: www.entrepreneurindia.co , www.niir.org

Tags

Industrial Polymers, Industrial Polymers in India, Industrial Additives, Additives Industry, Chemicals and Industrial Polymers, Industrial Polymers & Additives, Industrial Colorants, Industrial Colourants and Polymers, Industrial Colorants Materials, Industrial Fillers, Fillers Business & Industrial Polymers, Opportunities in Fillers Industry, Chlorinated Polyethylene, Cross-Linked Polyethylene, Linear Low-Density Polyethylene (LLDPE), High-Molecular-Weight High-Density Polyethylene, Ultrahigh-Molecular-Weight Polyethylene, Polypropylene, Olefin Copolymers, Ethylene-Propylene Elastomer, Thermoplastic Polyester Elastomers, Thermoplastic Polyurethane Elastomers, Thermoplastic Polyolefin Elastomers, Styrene-Acrylonitrile Copolymer, Acrylonitrile-Butadiene-Styrene Terpolymer, Poly (Acrylic Acid) and Poly (Methacrylic Acid), Condensation Polymers, Polyesters, Poly (Dihydroxymethylcyclohexyl Terephthalate), Polyester-Glass-Fiber Laminates (GRP, FRP), Formaldehyde Resins, Phenol-Formaldehyde Resins, Urea-Formaldehyde Resins, Melamine-Formaldehyde Resins, Thermoplastic Polyurethane Rubbers, Ether Polymers, Polyurethane Coatings, Poly (Phenylene Oxide), Poly (Phenylene Sulfide), Silicones and Other Inorganic Polymers, Polyethylene, High Density (HDPE), Allyl Resins (Dap/Daip), Fluoropolymers, Poly (Vinylidene Fluoride) (PVDF), Film Extrusion, Injection Molding, Polyamide-Imide (PAI), Polybutylene (PB), Polycarbonate (Pc), Polyethylene Linear Low Density (LLDPE), Flexible Poly (Vinyl Chloride) (FPVC), Fillers, Calcium Carbonate, Fillers, Kaolin, Air-Floated Kaolin, Water-Washed Kaolin, Calcined Kaolin, Surface-Modified Kaolins, Pigments and Dyes, Fillers, Alumina Trihydrate (ATH), Unsuaturated Polyester, Acrylonitrile-Butadiene-Styrene (Abs), Fillers, Fiber Glass, Polyethylene, Low Density (LDPE), Fillers, Calcium Sulfate, Polymers Filled, Silicone Fluids, Silicone Resins, Silicone Rubbers, Piezoelectric Polymers, Processability of HDPE, NPCS, Niir, Process technology books, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Best small and cottage scale industries, Startup India, Stand up India, Small Scale Industries, New small scale ideas for Industrial Colourants, Industrial PolymersBusiness Ideas you can start on your own, Small scale Industrial Colourants, Guide to Starting and Operating Small Business, Business Ideas for Industrial Fillers, How to start Industrial Polymersbusiness, Start Your Own Industrial FillersBusiness, Industrial Colourants Business Plan, Business plan for Industrial Additives, Small Scale Industries in India, Industrial PolymersBased Small Business Ideas in India, Small Scale Industry You Can Start on Your Own, Business plan for small scale industries, Profitable Small Scale Manufacturing, How to Start Small Business in India, Free Manufacturing Business Plans, Small and Medium Scale Manufacturing, Profitable Small Business Industries Ideas, Business ideas for Startup


blog comments powered by Disqus



About NIIR

Hide ^

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Blog